target/linux/brcm63xx/patches-3.18/567-board_dsl-2751b_e1.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -236,6 +236,141 @@ static struct board_info __initdata boar
   4                 },
   5         },
   6  };
   7 +
   8 +static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
   9 +       { .offset = 96, .value = 0x2046 },
  10 +       { .offset = 97, .value = 0xfe9d },
  11 +       { .offset = 98, .value = 0x1854 },
  12 +       { .offset = 99, .value = 0xfa59 },
  13 +       { .offset = 112, .value = 0x2046 },
  14 +       { .offset = 113, .value = 0xfe79 },
  15 +       { .offset = 114, .value = 0x17f5 },
  16 +       { .offset = 115, .value = 0xfa47 },
  17 +       { .offset = 161, .value = 0x2222 },
  18 +       { .offset = 162, .value = 0x2222 },
  19 +       { .offset = 169, .value = 0x2222 },
  20 +       { .offset = 170, .value = 0x2222 },
  21 +       { .offset = 171, .value = 0x5555 },
  22 +       { .offset = 172, .value = 0x5555 },
  23 +       { .offset = 173, .value = 0x4444 },
  24 +       { .offset = 174, .value = 0x4444 },
  25 +       { .offset = 175, .value = 0x5555 },
  26 +       { .offset = 176, .value = 0x5555 },
  27 +};
  28 +
  29 +static struct board_info __initdata board_dsl_2751b_d1 = {
  30 +       .name                           = "AW5200B",
  31 +       .expected_cpu_id                = 0x6318,
  32 +
  33 +       .has_uart0                      = 1,
  34 +       .has_pci                        = 1,
  35 +       .use_fallback_sprom             = 1,
  36 +
  37 +       .has_enetsw                     = 1,
  38 +
  39 +       .has_ohci0                      = 1,
  40 +       .has_ehci0                      = 1,
  41 +       .num_usbh_ports                 = 1,
  42 +
  43 +       .enetsw = {
  44 +               .used_ports = {
  45 +                       [0] = {
  46 +                               .used   = 1,
  47 +                               .phy_id = 1,
  48 +                               .name   = "Port 1",
  49 +                       },
  50 +                       [1] = {
  51 +                               .used   = 1,
  52 +                               .phy_id = 2,
  53 +                               .name   = "Port 2",
  54 +                       },
  55 +                       [2] = {
  56 +                               .used   = 1,
  57 +                               .phy_id = 3,
  58 +                               .name   = "Port 3",
  59 +                       },
  60 +                       [3] = {
  61 +                               .used   = 1,
  62 +                               .phy_id = 4,
  63 +                               .name   = "Port 4",
  64 +                       },
  65 +               },
  66 +       },
  67 +
  68 +       .leds = {
  69 +               {
  70 +                       .name           = "dsl-275xb:green:power",
  71 +                       .gpio           = 3,
  72 +                       .active_low     = 1,
  73 +                       .default_trigger = "default-on",
  74 +               },
  75 +               {
  76 +                       .name           = "dsl-275xb:green:inet",
  77 +                       .gpio           = 8,
  78 +                       .active_low     = 1,
  79 +               },
  80 +               {
  81 +                       .name           = "dsl-275xb:red:inet-fail",
  82 +                       .gpio           = 9,
  83 +                       .active_low     = 1,
  84 +               },
  85 +               {
  86 +                       .name           = "dsl-275xb:red:post-failed",
  87 +                       .gpio           = 11,
  88 +                       .active_low     = 1,
  89 +               },
  90 +               {
  91 +                       .name           = "dsl-275xb:wps:blue",
  92 +                       .gpio           = 16,
  93 +                       .active_low     = 1,
  94 +               },
  95 +               {
  96 +                       .name           = "dsl-275xb:green:dsl",
  97 +                       .gpio           = 17,
  98 +                       .active_low     = 1,
  99 +               },
 100 +               {
 101 +                       .name           = "dsl-275xb:green:usb",
 102 +                       .gpio           = 49, /* FIXME: does not work! */
 103 +                       .active_low     = 1,
 104 +               },
 105 +       },
 106 +
 107 +       .buttons = {
 108 +               {
 109 +                       .desc                   = "wlan",
 110 +                       .gpio                   = 2,
 111 +                       .active_low             = 1,
 112 +                       .type                   = EV_KEY,
 113 +                       .code                   = KEY_WLAN,
 114 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 115 +               },
 116 +               {
 117 +                       .desc                   = "wps",
 118 +                       .gpio                   = 33,
 119 +                       .active_low             = 1,
 120 +                       .type                   = EV_KEY,
 121 +                       .code                   = KEY_WPS_BUTTON,
 122 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 123 +               },
 124 +               {
 125 +                       .desc                   = "reset",
 126 +                       .gpio                   = 34,
 127 +                       .active_low             = 1,
 128 +                       .type                   = EV_KEY,
 129 +                       .code                   = KEY_RESTART,
 130 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 131 +               },
 132 +       },
 133 +
 134 +       .fallback_sprom = {
 135 +               .type                           = SPROM_BCM43217,
 136 +               .pci_bus                        = 1,
 137 +               .pci_dev                        = 0,
 138 +               .board_fixups                   = dsl2751b_e1_fixups,
 139 +               .num_board_fixups               = ARRAY_SIZE(dsl2751b_e1_fixups),
 140 +       },
 141 +};
 142  #endif /* CONFIG_BCM63XX_CPU_6318 */
 143
 144  /*
 145 @@ -2391,6 +2526,7 @@ static const struct board_info __initcon
 146  #ifdef CONFIG_BCM63XX_CPU_6318
 147         &board_96318ref,
 148         &board_96318ref_p300,
 149 +       &board_dsl_2751b_d1,
 150  #endif
 151  #ifdef CONFIG_BCM63XX_CPU_6328
 152         &board_96328avng,