brcm63xx: Add DGND3700 v1 / DGND3800B support
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.18 / 568-board_DGND3700v1_3800B.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -2132,6 +2132,48 @@
4 .has_ehci0 = 1,
5 };
6
7 +static struct b53_platform_data DGND3700v1_3800B_b53_pdata = {
8 + .alias = "eth0",
9 +};
10 +
11 +static struct spi_board_info DGND3700v1_3800B_spi_devices[] = {
12 + {
13 + .modalias = "b53-switch",
14 + .max_speed_hz = 781000,
15 + .bus_num = 0,
16 + .chip_select = 1,
17 + .platform_data = &DGND3700v1_3800B_b53_pdata,
18 + }
19 +};
20 +
21 +static struct board_info __initdata board_DGND3700v1_3800B = {
22 + .name = "DGND3700v1_3800B",
23 + .expected_cpu_id = 0x6368,
24 +
25 + .has_uart0 = 1,
26 + .has_pci = 1,
27 + .has_ohci0 = 1,
28 + .has_ehci0 = 1,
29 + .num_usbh_ports = 2,
30 +
31 + .has_enetsw = 1,
32 + .enetsw = {
33 + .used_ports = {
34 + [5] = {
35 + .used = 1,
36 + .phy_id = 0xff,
37 + .bypass_link = 1,
38 + .force_speed = 1000,
39 + .force_duplex_full = 1,
40 + .name = "RGMII",
41 + },
42 + },
43 + },
44 +
45 + .spis = DGND3700v1_3800B_spi_devices,
46 + .num_spis = ARRAY_SIZE(DGND3700v1_3800B_spi_devices),
47 +};
48 +
49 static struct sprom_fixup __initdata vr3025u_fixups[] = {
50 { .offset = 97, .value = 0xfeb3 },
51 { .offset = 98, .value = 0x1618 },
52 @@ -2723,6 +2765,7 @@
53 #ifdef CONFIG_BCM63XX_CPU_6368
54 &board_96368mvwg,
55 &board_96368mvngr,
56 + &board_DGND3700v1_3800B,
57 &board_P870HW51A_V2,
58 &board_VR3025u,
59 &board_VR3025un,
60 @@ -2813,6 +2856,7 @@
61 { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
62 { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
63 { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
64 + { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
65 { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
66 #endif
67 #ifdef CONFIG_BCM63XX_CPU_63268