bcm63xx: update enetswitch driver
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.3 / 526-board_CT6373-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -51,6 +51,13 @@
4 #define NB4_SPI_GPIO_CLK 6
5 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
6
7 +#define CT6373_PID_OFFSET 0xff80
8 +#define CT6373_74X164_GPIO_BASE 64
9 +#define CT6373_SPI_GPIO_MOSI 7
10 +#define CT6373_SPI_GPIO_CLK 6
11 +#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
12 +
13 +
14 static struct board_info board;
15
16 /*
17 @@ -2171,6 +2178,111 @@ static struct board_info __initdata boar
18 .num_spis = ARRAY_SIZE(nb4_spi_devices),
19 };
20
21 +
22 +struct spi_gpio_platform_data ct6373_spi_gpio_data = {
23 + .sck = CT6373_SPI_GPIO_CLK,
24 + .mosi = CT6373_SPI_GPIO_MOSI,
25 + .miso = SPI_GPIO_NO_MISO,
26 + .num_chipselect = 1,
27 +};
28 +
29 +static struct platform_device ct6373_spi_gpio = {
30 + .name = "spi_gpio",
31 + .id = 1,
32 + .dev = {
33 + .platform_data = &ct6373_spi_gpio_data,
34 + },
35 +};
36 +
37 +static struct platform_device * __initdata ct6373_devices[] = {
38 + &ct6373_spi_gpio,
39 +};
40 +
41 +const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
42 + .base = CT6373_74X164_GPIO_BASE
43 +};
44 +
45 +static struct spi_board_info ct6373_spi_devices[] = {
46 + {
47 + .modalias = "74x164",
48 + .max_speed_hz = 781000,
49 + .bus_num = 1,
50 + .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
51 + .mode = SPI_MODE_0,
52 + .platform_data = &ct6373_74x164_platform_data
53 + }
54 +};
55 +
56 +static struct board_info __initdata board_ct6373_1 = {
57 + .name = "CT6373-1",
58 + .expected_cpu_id = 0x6358,
59 +
60 + .has_uart0 = 1,
61 + .has_pci = 1,
62 + .has_ohci0 = 1,
63 + .has_ehci0 = 1,
64 +
65 + .has_enet1 = 1,
66 + .enet1 = {
67 + .force_speed_100 = 1,
68 + .force_duplex_full = 1,
69 + },
70 +
71 + .leds = {
72 + {
73 + .name = "CT6373-1:green:power",
74 + .gpio = 0,
75 + .default_trigger = "default-on",
76 + },
77 + {
78 + .name = "CT6373-1:green:usb",
79 + .gpio = 3,
80 + .active_low = 1,
81 + },
82 + {
83 + .name = "CT6373-1:green:wlan",
84 + .gpio = 9,
85 + .active_low = 1,
86 + },
87 + {
88 + .name = "CT6373-1:green:adsl",
89 + .gpio = CT6373_74HC64_GPIO(0),
90 + .active_low = 1,
91 + },
92 + {
93 + .name = "CT6373-1:green:line",
94 + .gpio = CT6373_74HC64_GPIO(1),
95 + .active_low = 1,
96 + },
97 + {
98 + .name = "CT6373-1:green:fxs1",
99 + .gpio = CT6373_74HC64_GPIO(2),
100 + .active_low = 1,
101 + },
102 + {
103 + .name = "CT6373-1:green:fxs2",
104 + .gpio = CT6373_74HC64_GPIO(3),
105 + .active_low = 1,
106 + },
107 + },
108 +
109 + .buttons = {
110 + {
111 + .desc = "reset",
112 + .gpio = 35,
113 + .active_low = 1,
114 + .type = EV_KEY,
115 + .code = KEY_RESTART,
116 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
117 + },
118 + },
119 +
120 + .devs = ct6373_devices,
121 + .num_devs = ARRAY_SIZE(ct6373_devices),
122 + .spis = ct6373_spi_devices,
123 + .num_spis = ARRAY_SIZE(ct6373_spi_devices),
124 +};
125 +
126 static struct board_info __initdata board_HW553 = {
127 .name = "HW553",
128 .expected_cpu_id = 0x6358,
129 @@ -2502,6 +2614,7 @@ static const struct board_info __initdat
130 &board_nb4_ser_r2,
131 &board_nb4_fxc_r1,
132 &board_nb4_fxc_r2,
133 + &board_ct6373_1,
134 &board_HW553,
135 &board_spw303v,
136 #endif