[brcm63xx] nb4: fix support, add support for SVC and CLIP BTN
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.3 / 527-board_dva-g3810bn-tl-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -2512,6 +2512,71 @@ static struct board_info __initdata boar
4 },
5 }
6 };
7 +
8 +/* D-Link DVA-G3810BN/TL */
9 +static struct board_info __initdata board_DVAG3810BN = {
10 + .name = "DVAG3810BN",
11 + .expected_cpu_id = 0x6358,
12 +
13 + .has_uart0 = 1,
14 + .has_enet0 = 1,
15 + .has_enet1 = 1,
16 + .has_pci = 1,
17 +
18 + .enet0 = {
19 + .has_phy = 0,
20 + .use_internal_phy = 1,
21 + .force_speed_100 = 1,
22 + .force_duplex_full = 1,
23 + },
24 +
25 + .enet1 = {
26 + .force_speed_100 = 1,
27 + .force_duplex_full = 1,
28 + },
29 +
30 +
31 + .has_ohci0 = 1,
32 + .has_pccard = 1,
33 + .has_ehci0 = 1,
34 +
35 + .leds = {
36 + {
37 + .name = "DVAG3810BN::voip",
38 + .gpio = 1,
39 + },
40 + {
41 + .name = "DVAG3810BN::dsl",
42 + .gpio = 22,
43 + .active_low = 1,
44 + },
45 + {
46 + .name = "DVAG3810BN::internet",
47 + .gpio = 23,
48 + .active_low = 1,
49 + },
50 + {
51 + .name = "DVAG3810BN::power",
52 + .gpio = 4,
53 + .default_trigger = "default-on",
54 + },
55 + {
56 + .name = "DVAG3810BN::stop",
57 + .gpio = 5,
58 + },
59 + },
60 +
61 + .buttons = {
62 + {
63 + .desc = "reset",
64 + .gpio = 34,
65 + .active_low = 1,
66 + .type = EV_KEY,
67 + .code = KEY_RESTART,
68 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
69 + },
70 + },
71 +};
72 #endif
73
74 /*
75 @@ -2707,6 +2772,7 @@ static const struct board_info __initdat
76 &board_ct6373_1,
77 &board_HW553,
78 &board_spw303v,
79 + &board_DVAG3810BN,
80 #endif
81
82 #ifdef CONFIG_BCM63XX_CPU_6368