bcm63xx: add 3.9 support
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.9 / 526-board_CT6373-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -54,6 +54,13 @@
4 #define NB4_SPI_GPIO_CLK 6
5 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
6
7 +#define CT6373_PID_OFFSET 0xff80
8 +#define CT6373_74X164_GPIO_BASE 64
9 +#define CT6373_SPI_GPIO_MOSI 7
10 +#define CT6373_SPI_GPIO_CLK 6
11 +#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
12 +
13 +
14 static struct board_info board;
15
16 /*
17 @@ -2306,6 +2313,113 @@ static struct board_info __initdata boar
18 .num_spis = ARRAY_SIZE(nb4_spi_devices),
19 };
20
21 +
22 +struct spi_gpio_platform_data ct6373_spi_gpio_data = {
23 + .sck = CT6373_SPI_GPIO_CLK,
24 + .mosi = CT6373_SPI_GPIO_MOSI,
25 + .miso = SPI_GPIO_NO_MISO,
26 + .num_chipselect = 1,
27 +};
28 +
29 +static struct platform_device ct6373_spi_gpio = {
30 + .name = "spi_gpio",
31 + .id = 1,
32 + .dev = {
33 + .platform_data = &ct6373_spi_gpio_data,
34 + },
35 +};
36 +
37 +static struct platform_device * __initdata ct6373_devices[] = {
38 + &ct6373_spi_gpio,
39 +};
40 +
41 +const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
42 + .base = CT6373_74X164_GPIO_BASE
43 +};
44 +
45 +static struct spi_board_info ct6373_spi_devices[] = {
46 + {
47 + .modalias = "74x164",
48 + .max_speed_hz = 781000,
49 + .bus_num = 1,
50 + .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
51 + .mode = SPI_MODE_0,
52 + .platform_data = &ct6373_74x164_platform_data
53 + }
54 +};
55 +
56 +static struct board_info __initdata board_ct6373_1 = {
57 + .name = "CT6373-1",
58 + .expected_cpu_id = 0x6358,
59 +
60 + .has_uart0 = 1,
61 + .has_pci = 1,
62 + .has_ohci0 = 1,
63 + .has_ehci0 = 1,
64 +
65 + .has_enet1 = 1,
66 + .enet1 = {
67 + .has_phy = 1,
68 + .phy_id = 0,
69 + .force_speed_100 = 1,
70 + .force_duplex_full = 1,
71 + },
72 +
73 + .leds = {
74 + {
75 + .name = "CT6373-1:green:power",
76 + .gpio = 0,
77 + .default_trigger = "default-on",
78 + },
79 + {
80 + .name = "CT6373-1:green:usb",
81 + .gpio = 3,
82 + .active_low = 1,
83 + },
84 + {
85 + .name = "CT6373-1:green:wlan",
86 + .gpio = 9,
87 + .active_low = 1,
88 + },
89 + {
90 + .name = "CT6373-1:green:adsl",
91 + .gpio = CT6373_74HC64_GPIO(0),
92 + .active_low = 1,
93 + },
94 + {
95 + .name = "CT6373-1:green:line",
96 + .gpio = CT6373_74HC64_GPIO(1),
97 + .active_low = 1,
98 + },
99 + {
100 + .name = "CT6373-1:green:fxs1",
101 + .gpio = CT6373_74HC64_GPIO(2),
102 + .active_low = 1,
103 + },
104 + {
105 + .name = "CT6373-1:green:fxs2",
106 + .gpio = CT6373_74HC64_GPIO(3),
107 + .active_low = 1,
108 + },
109 + },
110 +
111 + .buttons = {
112 + {
113 + .desc = "reset",
114 + .gpio = 35,
115 + .active_low = 1,
116 + .type = EV_KEY,
117 + .code = KEY_RESTART,
118 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
119 + },
120 + },
121 +
122 + .devs = ct6373_devices,
123 + .num_devs = ARRAY_SIZE(ct6373_devices),
124 + .spis = ct6373_spi_devices,
125 + .num_spis = ARRAY_SIZE(ct6373_spi_devices),
126 +};
127 +
128 static struct board_info __initdata board_HW553 = {
129 .name = "HW553",
130 .expected_cpu_id = 0x6358,
131 @@ -2639,6 +2753,7 @@ static const struct board_info __initcon
132 &board_nb4_ser_r2,
133 &board_nb4_fxc_r1,
134 &board_nb4_fxc_r2,
135 + &board_ct6373_1,
136 &board_HW553,
137 &board_spw303v,
138 #endif