target/linux/generic-2.6/files/include/linux/myloader.h

   1 /*
   2  *  Compex's MyLoader specific definitions
   3  *
   4  *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  *
  10  */
  11
  12 #ifndef _MYLOADER_H_
  13 #define _MYLOADER_H_
  14
  15 /* Myloader specific magic numbers */
  16 #define MYLO_MAGIC_SYS_PARAMS   0x20021107
  17 #define MYLO_MAGIC_PARTITIONS   0x20021103
  18 #define MYLO_MAGIC_BOARD_PARAMS 0x20021103
  19
  20 /* Vendor ID's (seems to be same as the PCI vendor ID's) */
  21 #define VENID_COMPEX            0x11F6
  22
  23 /* Devices based on the ADM5120 */
  24 #define DEVID_COMPEX_NP27G      0x0078
  25 #define DEVID_COMPEX_NP28G      0x044C
  26 #define DEVID_COMPEX_NP28GHS    0x044E
  27 #define DEVID_COMPEX_WP54Gv1C   0x0514
  28 #define DEVID_COMPEX_WP54G      0x0515
  29 #define DEVID_COMPEX_WP54AG     0x0546
  30 #define DEVID_COMPEX_WPP54AG    0x0550
  31 #define DEVID_COMPEX_WPP54G     0x0555
  32
  33 /* Devices based on the Atheros AR2317 */
  34 #define DEVID_COMPEX_NP25G      0x05E6
  35 #define DEVID_COMPEX_WPE53G     0x05DC
  36
  37 /* Devices based on the Atheros AR71xx */
  38 #define DEVID_COMPEX_WP543      0x0640
  39
  40 /* Devices based on the IXP422 */
  41 #define DEVID_COMPEX_WP18       0x047E
  42 #define DEVID_COMPEX_NP18A      0x0489
  43
  44 /* Other devices */
  45 #define DEVID_COMPEX_NP26G8M    0x03E8
  46 #define DEVID_COMPEX_NP26G16M   0x03E9
  47
  48 struct mylo_partition {
  49         uint16_t        flags;  /* partition flags */
  50         uint16_t        type;   /* type of the partition */
  51         uint32_t        addr;   /* relative address of the partition from the
  52                                    flash start */
  53         uint32_t        size;   /* size of the partition in bytes */
  54         uint32_t        param;  /* if this is the active partition, the
  55                                    MyLoader load code to this address */
  56 };
  57
  58 #define PARTITION_FLAG_ACTIVE   0x8000 /* this is the active partition,
  59                                         * MyLoader loads firmware from here */
  60 #define PARTITION_FLAG_ISRAM    0x2000 /* FIXME: this is a RAM partition? */
  61 #define PARTIIION_FLAG_RAMLOAD  0x1000 /* FIXME: load this partition into the RAM? */
  62 #define PARTITION_FLAG_PRELOAD  0x0800 /* the partition data preloaded to RAM
  63                                         * before decompression */
  64 #define PARTITION_FLAG_LZMA     0x0100 /* partition data compressed by LZMA */
  65 #define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
  66
  67 #define PARTITION_TYPE_FREE     0
  68 #define PARTITION_TYPE_USED     1
  69
  70 #define MYLO_MAX_PARTITIONS     8       /* maximum number of partitions in the
  71                                            partition table */
  72
  73 struct mylo_partition_table {
  74         uint32_t        magic;          /* must be MYLO_MAGIC_PARTITIONS */
  75         uint32_t        res0;           /* unknown/unused */
  76         uint32_t        res1;           /* unknown/unused */
  77         uint32_t        res2;           /* unknown/unused */
  78         struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
  79 };
  80
  81 struct mylo_partition_header {
  82         uint32_t        len;            /* length of the partition data */
  83         uint32_t        crc;            /* CRC value of the partition data */
  84 };
  85
  86 struct mylo_system_params {
  87         uint32_t        magic;          /* must be MYLO_MAGIC_SYS_PARAMS */
  88         uint32_t        res0;
  89         uint32_t        res1;
  90         uint32_t        mylo_ver;
  91         uint16_t        vid;            /* Vendor ID */
  92         uint16_t        did;            /* Device ID */
  93         uint16_t        svid;           /* Sub Vendor ID */
  94         uint16_t        sdid;           /* Sub Device ID */
  95         uint32_t        rev;            /* device revision */
  96         uint32_t        fwhi;
  97         uint32_t        fwlo;
  98         uint32_t        tftp_addr;
  99         uint32_t        prog_start;
 100         uint32_t        flash_size;     /* size of boot FLASH in bytes */
 101         uint32_t        dram_size;      /* size of onboard RAM in bytes */
 102 };
 103
 104 struct mylo_eth_addr {
 105         uint8_t mac[6];
 106         uint8_t csum[2];
 107 };
 108
 109 #define MYLO_ETHADDR_COUNT      8       /* maximum number of ethernet address
 110                                            in the board parameters */
 111
 112 struct mylo_board_params {
 113         uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
 114         uint32_t        res0;
 115         uint32_t        res1;
 116         uint32_t        res2;
 117         struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
 118 };
 119
 120 #endif /* _MYLOADER_H_*/