[ifxmips] move kernel support to 2.6.28.7
[openwrt/svn-archive/archive.git] / target / linux / ifxmips / patches-2.6.28 / 110-drivers.patch
1 --- a/drivers/char/Makefile
2 +++ b/drivers/char/Makefile
3 @@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
4 obj-$(CONFIG_JS_RTC) += js-rtc.o
5 js-rtc-y = rtc.o
6
7 +obj-$(CONFIG_IFXMIPS_SSC) += ifxmips_ssc.o
8 +obj-$(CONFIG_IFXMIPS_EEPROM) += ifxmips_eeprom.o
9 +obj-$(CONFIG_IFXMIPS_MEI) += ifxmips_mei_core.o
10 +
11 # Files generated that shall be removed upon make clean
12 clean-files := consolemap_deftbl.c defkeymap.c
13
14 --- a/drivers/mtd/maps/Makefile
15 +++ b/drivers/mtd/maps/Makefile
16 @@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel) += nettel.o
17 obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
18 obj-$(CONFIG_MTD_H720X) += h720x-flash.o
19 obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
20 +obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
21 obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
22 obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
23 obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
24 --- a/drivers/net/Kconfig
25 +++ b/drivers/net/Kconfig
26 @@ -343,6 +343,12 @@ config MACB
27
28 source "drivers/net/arm/Kconfig"
29
30 +config IFXMIPS_MII0
31 + tristate "Infineon IFXMips eth0 driver"
32 + depends on IFXMIPS
33 + help
34 + Support for the MII0 inside the IFXMips SOC
35 +
36 config AX88796
37 tristate "ASIX AX88796 NE2000 clone support"
38 depends on ARM || MIPS || SUPERH
39 --- a/drivers/serial/Kconfig
40 +++ b/drivers/serial/Kconfig
41 @@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM
42 Currently, only 8250 compatible ports are supported, but
43 others can easily be added.
44
45 +config SERIAL_IFXMIPS
46 + bool "IFXMips serial driver"
47 + depends on IFXMIPS
48 + select SERIAL_CORE
49 + select SERIAL_CORE_CONSOLE
50 + help
51 + Driver for the ifxmipss built in ASC hardware
52 +
53 config SERIAL_QE
54 tristate "Freescale QUICC Engine serial port support"
55 depends on QUICC_ENGINE
56 --- a/drivers/serial/Makefile
57 +++ b/drivers/serial/Makefile
58 @@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
59 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
60 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
61 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
62 +obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
63 --- a/drivers/watchdog/Makefile
64 +++ b/drivers/watchdog/Makefile
65 @@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
66 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
67 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
68 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
69 +obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
70
71 # PARISC Architecture
72
73 --- a/drivers/net/Makefile
74 +++ b/drivers/net/Makefile
75 @@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
76 obj-$(CONFIG_NIU) += niu.o
77 obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
78 obj-$(CONFIG_SFC) += sfc/
79 -
80 +obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
81 --- a/drivers/crypto/Kconfig
82 +++ b/drivers/crypto/Kconfig
83 @@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
84 If you say N, all options in this submenu will be skipped and disabled.
85
86 if CRYPTO_HW
87 +config CRYPTO_DEV_IFXMIPS
88 + tristate "Support for IFXMIPS Data Encryption Unit"
89 + depends on IFXMIPS
90
91 config CRYPTO_DEV_PADLOCK
92 tristate "Support for VIA PadLock ACE"
93 --- a/drivers/crypto/Makefile
94 +++ b/drivers/crypto/Makefile
95 @@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
96 obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
97 obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
98 obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
99 +obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
100 --- a/drivers/usb/host/Kconfig
101 +++ b/drivers/usb/host/Kconfig
102 @@ -321,3 +321,10 @@ config USB_HWA_HCD
103
104 To compile this driver a module, choose M here: the module
105 will be called "hwa-hc".
106 +
107 +config USB_DWC_HCD
108 + tristate "IFXMIPS USB Host Controller Driver"
109 + depends on USB && IFXMIPS
110 + default y
111 + help
112 + Danube USB Host Controller
113 --- a/drivers/leds/Kconfig
114 +++ b/drivers/leds/Kconfig
115 @@ -171,6 +171,12 @@ config LEDS_DA903X
116 This option enables support for on-chip LED drivers found
117 on Dialog Semiconductor DA9030/DA9034 PMICs.
118
119 +config LEDS_IFXMIPS
120 + tristate "LED Support for IFXMIPS LEDs"
121 + depends on LEDS_CLASS && IFXMIPS
122 + help
123 + This option enables support for the IFXMIPS LEDs.
124 +
125 comment "LED Triggers"
126
127 config LEDS_TRIGGERS
128 --- a/drivers/leds/Makefile
129 +++ b/drivers/leds/Makefile
130 @@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
131 obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
132 obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
133 obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o
134 +obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
135
136 # LED Triggers
137 obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
138 --- a/drivers/watchdog/Kconfig
139 +++ b/drivers/watchdog/Kconfig
140 @@ -747,6 +747,12 @@ config TXX9_WDT
141 help
142 Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
143
144 +config IFXMIPS_WDT
145 + bool "IFXMips watchdog"
146 + depends on IFXMIPS
147 + help
148 + Hardware driver for the IFXMIPS Watchdog Timer.
149 +
150 # PARISC Architecture
151
152 # POWERPC Architecture