target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch

   1 From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
   2 From: Mathieu Olivari <mathieu@codeaurora.org>
   3 Date: Tue, 7 Apr 2015 19:58:58 -0700
   4 Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
   5
   6 Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
   7 SATA, USB2, USB3 and NOR flash.
   8
   9 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
  10 ---
  11  arch/arm/boot/dts/Makefile               |   1 +
  12  arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
  13  2 files changed, 258 insertions(+)
  14  create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
  15
  16 --- a/arch/arm/boot/dts/Makefile
  17 +++ b/arch/arm/boot/dts/Makefile
  18 @@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  19         qcom-apq8084-ifc6540.dtb \
  20         qcom-apq8084-mtp.dtb \
  21         qcom-ipq8064-ap148.dtb \
  22 +       qcom-ipq8064-db149.dtb \
  23         qcom-msm8660-surf.dtb \
  24         qcom-msm8960-cdp.dtb \
  25         qcom-msm8974-sony-xperia-honami.dtb
  26 --- /dev/null
  27 +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
  28 @@ -0,0 +1,257 @@
  29 +#include "qcom-ipq8064-v1.0.dtsi"
  30 +
  31 +/ {
  32 +       model = "Qualcomm IPQ8064/DB149";
  33 +       compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
  34 +
  35 +       reserved-memory {
  36 +               #address-cells = <1>;
  37 +               #size-cells = <1>;
  38 +               ranges;
  39 +               rsvd@41200000 {
  40 +                       reg = <0x41200000 0x300000>;
  41 +                       no-map;
  42 +               };
  43 +       };
  44 +
  45 +       alias {
  46 +               serial0 = &uart2;
  47 +       };
  48 +
  49 +       chosen {
  50 +               linux,stdout-path = "serial0:115200n8";
  51 +       };
  52 +
  53 +       aliases {
  54 +               mdio-gpio0 = &mdio0;
  55 +       };
  56 +
  57 +       soc {
  58 +               pinmux@800000 {
  59 +                       pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
  60 +                       pinctrl-names = "default";
  61 +
  62 +                       i2c4_pins: i2c4_pinmux {
  63 +                               pins = "gpio12", "gpio13";
  64 +                               function = "gsbi4";
  65 +                               bias-disable;
  66 +                       };
  67 +
  68 +                       spi_pins: spi_pins {
  69 +                               mux {
  70 +                                       pins = "gpio18", "gpio19", "gpio21";
  71 +                                       function = "gsbi5";
  72 +                                       drive-strength = <10>;
  73 +                                       bias-none;
  74 +                               };
  75 +                       };
  76 +
  77 +                       mdio0_pins: mdio0_pins {
  78 +                               mux {
  79 +                                       pins = "gpio0", "gpio1";
  80 +                                       function = "gpio";
  81 +                                       drive-strength = <8>;
  82 +                                       bias-disable;
  83 +                               };
  84 +                       };
  85 +
  86 +                       rgmii0_pinmux: rgmii0_pinmux {
  87 +                               mux {
  88 +                                       pins = "gpio2", "gpio66";
  89 +                                       drive-strength = <8>;
  90 +                                       bias-disable;
  91 +                               };
  92 +                       };
  93 +               };
  94 +
  95 +               gsbi2: gsbi@12480000 {
  96 +                       qcom,mode = <GSBI_PROT_I2C_UART>;
  97 +                       status = "ok";
  98 +                       uart2: serial@12490000 {
  99 +                               status = "ok";
 100 +                       };
 101 +               };
 102 +
 103 +               gsbi5: gsbi@1a200000 {
 104 +                       qcom,mode = <GSBI_PROT_SPI>;
 105 +                       status = "ok";
 106 +
 107 +                       spi4: spi@1a280000 {
 108 +                               status = "ok";
 109 +                               spi-max-frequency = <50000000>;
 110 +
 111 +                               pinctrl-0 = <&spi_pins>;
 112 +                               pinctrl-names = "default";
 113 +
 114 +                               cs-gpios = <&qcom_pinmux 20 0>;
 115 +
 116 +                               flash: m25p80@0 {
 117 +                                       compatible = "s25fl256s1";
 118 +                                       #address-cells = <1>;
 119 +                                       #size-cells = <1>;
 120 +                                       spi-max-frequency = <50000000>;
 121 +                                       reg = <0>;
 122 +                                       m25p,fast-read;
 123 +
 124 +                                       partition@0 {
 125 +                                               label = "lowlevel_init";
 126 +                                               reg = <0x0 0x1b0000>;
 127 +                                       };
 128 +
 129 +                                       partition@1 {
 130 +                                               label = "u-boot";
 131 +                                               reg = <0x1b0000 0x80000>;
 132 +                                       };
 133 +
 134 +                                       partition@2 {
 135 +                                               label = "u-boot-env";
 136 +                                               reg = <0x230000 0x40000>;
 137 +                                       };
 138 +
 139 +                                       partition@3 {
 140 +                                               label = "caldata";
 141 +                                               reg = <0x270000 0x40000>;
 142 +                                       };
 143 +
 144 +                                       partition@4 {
 145 +                                               label = "firmware";
 146 +                                               reg = <0x2b0000 0x1d50000>;
 147 +                                       };
 148 +                               };
 149 +                       };
 150 +               };
 151 +
 152 +               sata-phy@1b400000 {
 153 +                       status = "ok";
 154 +               };
 155 +
 156 +               sata@29000000 {
 157 +                       status = "ok";
 158 +               };
 159 +
 160 +               phy@100f8800 {          /* USB3 port 1 HS phy */
 161 +                       status = "ok";
 162 +               };
 163 +
 164 +               phy@100f8830 {          /* USB3 port 1 SS phy */
 165 +                       status = "ok";
 166 +               };
 167 +
 168 +               phy@110f8800 {          /* USB3 port 0 HS phy */
 169 +                       status = "ok";
 170 +               };
 171 +
 172 +               phy@110f8830 {          /* USB3 port 0 SS phy */
 173 +                       status = "ok";
 174 +               };
 175 +
 176 +               usb30@0 {
 177 +                       status = "ok";
 178 +               };
 179 +
 180 +               usb30@1 {
 181 +                       status = "ok";
 182 +               };
 183 +
 184 +               mdio0: mdio {
 185 +                       compatible = "virtual,mdio-gpio";
 186 +                       #address-cells = <1>;
 187 +                       #size-cells = <0>;
 188 +                       gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 189 +
 190 +                       phy0: ethernet-phy@0 {
 191 +                               device_type = "ethernet-phy";
 192 +                               reg = <0>;
 193 +                               qca,ar8327-initvals = <
 194 +                                       0x00004 0x7600000   /* PAD0_MODE */
 195 +                                       0x00008 0x1000000   /* PAD5_MODE */
 196 +                                       0x0000c 0x80        /* PAD6_MODE */
 197 +                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
 198 +                                       0x000e0 0xc74164de  /* SGMII_CTRL */
 199 +                                       0x0007c 0x4e        /* PORT0_STATUS */
 200 +                                       0x00094 0x4e        /* PORT6_STATUS */
 201 +                               >;
 202 +                       };
 203 +
 204 +                       phy4: ethernet-phy@4 {
 205 +                               device_type = "ethernet-phy";
 206 +                               reg = <4>;
 207 +                       };
 208 +
 209 +                       phy6: ethernet-phy@6 {
 210 +                               device_type = "ethernet-phy";
 211 +                               reg = <6>;
 212 +                       };
 213 +
 214 +                       phy7: ethernet-phy@7 {
 215 +                               device_type = "ethernet-phy";
 216 +                               reg = <7>;
 217 +                       };
 218 +               };
 219 +
 220 +               nss-gmac-common {
 221 +                       reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
 222 +                       reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
 223 +               };
 224 +
 225 +               gmac0: ethernet@37000000 {
 226 +                       status = "ok";
 227 +                       phy-mode = "rgmii";
 228 +                       qcom,id = <0>;
 229 +                       qcom,phy_mdio_addr = <4>;
 230 +                       qcom,poll_required = <1>;
 231 +                       qcom,rgmii_delay = <1>;
 232 +                       qcom,emulation = <0>;
 233 +                       qcom,forced_speed = <1000>;
 234 +                       qcom,forced_duplex = <1>;
 235 +                       qcom,socver = <0>;
 236 +                       local-mac-address = [000000000000];
 237 +                       mdiobus = <&mdio0>;
 238 +               };
 239 +
 240 +               gmac1: ethernet@37200000 {
 241 +                       status = "ok";
 242 +                       phy-mode = "sgmii";
 243 +                       qcom,id = <1>;
 244 +                       qcom,phy_mdio_addr = <0>;
 245 +                       qcom,poll_required = <0>;
 246 +                       qcom,rgmii_delay = <0>;
 247 +                       qcom,emulation = <0>;
 248 +                       qcom,forced_speed = <1000>;
 249 +                       qcom,forced_duplex = <1>;
 250 +                       qcom,socver = <0>;
 251 +                       local-mac-address = [000000000000];
 252 +                       mdiobus = <&mdio0>;
 253 +               };
 254 +
 255 +               gmac2: ethernet@37400000 {
 256 +                       status = "ok";
 257 +                       phy-mode = "sgmii";
 258 +                       qcom,id = <2>;
 259 +                       qcom,phy_mdio_addr = <6>;
 260 +                       qcom,poll_required = <1>;
 261 +                       qcom,rgmii_delay = <0>;
 262 +                       qcom,emulation = <0>;
 263 +                       qcom,forced_speed = <0>;
 264 +                       qcom,forced_duplex = <0>;
 265 +                       qcom,socver = <0>;
 266 +                       local-mac-address = [000000000000];
 267 +                       mdiobus = <&mdio0>;
 268 +               };
 269 +
 270 +               gmac3: ethernet@37600000 {
 271 +                       status = "ok";
 272 +                       phy-mode = "sgmii";
 273 +                       qcom,id = <3>;
 274 +                       qcom,phy_mdio_addr = <7>;
 275 +                       qcom,poll_required = <1>;
 276 +                       qcom,rgmii_delay = <0>;
 277 +                       qcom,emulation = <0>;
 278 +                       qcom,forced_speed = <0>;
 279 +                       qcom,forced_duplex = <0>;
 280 +                       qcom,socver = <0>;
 281 +                       local-mac-address = [000000000000];
 282 +                       mdiobus = <&mdio0>;
 283 +               };
 284 +       };
 285 +};