target/linux/ipq806x/patches/0092-ARM-dts-qcom-Update-msm8960-device-trees.patch

   1 From 881200420e6ece87d9abbb13c0653d26455cdbdd Mon Sep 17 00:00:00 2001
   2 From: Kumar Gala <galak@codeaurora.org>
   3 Date: Wed, 28 May 2014 12:09:53 -0500
   4 Subject: [PATCH 092/182] ARM: dts: qcom: Update msm8960 device trees
   5
   6 * Move SoC peripherals into an SoC container node
   7 * Move serial enabling into board file (qcom-msm8960-cdp.dts)
   8 * Cleanup cpu node to match binding spec, enable-method and compatible
   9   should be per cpu, not part of the container
  10 * Drop interrupts property from l2-cache node as its not part of the
  11   binding spec
  12 * Add GSBI node and configuration of GSBI controller
  13
  14 Signed-off-by: Kumar Gala <galak@codeaurora.org>
  15 ---
  16  arch/arm/boot/dts/qcom-msm8960-cdp.dts |   10 ++
  17  arch/arm/boot/dts/qcom-msm8960.dtsi    |  176 ++++++++++++++++++--------------
  18  2 files changed, 108 insertions(+), 78 deletions(-)
  19
  20 diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
  21 index a58fb88..8f75cc4 100644
  22 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
  23 +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
  24 @@ -3,4 +3,14 @@
  25  / {
  26         model = "Qualcomm MSM8960 CDP";
  27         compatible = "qcom,msm8960-cdp", "qcom,msm8960";
  28 +
  29 +       soc {
  30 +               gsbi@16400000 {
  31 +                       status = "ok";
  32 +                       qcom,mode = <GSBI_PROT_I2C_UART>;
  33 +                       serial@16440000 {
  34 +                               status = "ok";
  35 +                       };
  36 +               };
  37 +       };
  38  };
  39 diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
  40 index 997b7b9..5303e53 100644
  41 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi
  42 +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
  43 @@ -3,6 +3,7 @@
  44  /include/ "skeleton.dtsi"
  45
  46  #include <dt-bindings/clock/qcom,gcc-msm8960.h>
  47 +#include <dt-bindings/soc/qcom,gsbi.h>
  48
  49  / {
  50         model = "Qualcomm MSM8960";
  51 @@ -13,10 +14,10 @@
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 interrupts = <1 14 0x304>;
  55 -               compatible = "qcom,krait";
  56 -               enable-method = "qcom,kpss-acc-v1";
  57
  58                 cpu@0 {
  59 +                       compatible = "qcom,krait";
  60 +                       enable-method = "qcom,kpss-acc-v1";
  61                         device_type = "cpu";
  62                         reg = <0>;
  63                         next-level-cache = <&L2>;
  64 @@ -25,6 +26,8 @@
  65                 };
  66
  67                 cpu@1 {
  68 +                       compatible = "qcom,krait";
  69 +                       enable-method = "qcom,kpss-acc-v1";
  70                         device_type = "cpu";
  71                         reg = <1>;
  72                         next-level-cache = <&L2>;
  73 @@ -35,7 +38,6 @@
  74                 L2: l2-cache {
  75                         compatible = "cache";
  76                         cache-level = <2>;
  77 -                       interrupts = <0 2 0x4>;
  78                 };
  79         };
  80
  81 @@ -45,91 +47,109 @@
  82                 qcom,no-pc-write;
  83         };
  84
  85 -       intc: interrupt-controller@2000000 {
  86 -               compatible = "qcom,msm-qgic2";
  87 -               interrupt-controller;
  88 -               #interrupt-cells = <3>;
  89 -               reg = < 0x02000000 0x1000 >,
  90 -                     < 0x02002000 0x1000 >;
  91 -       };
  92 +       soc: soc {
  93 +               #address-cells = <1>;
  94 +               #size-cells = <1>;
  95 +               ranges;
  96 +               compatible = "simple-bus";
  97 +
  98 +               intc: interrupt-controller@2000000 {
  99 +                       compatible = "qcom,msm-qgic2";
 100 +                       interrupt-controller;
 101 +                       #interrupt-cells = <3>;
 102 +                       reg = <0x02000000 0x1000>,
 103 +                             <0x02002000 0x1000>;
 104 +               };
 105
 106 -       timer@200a000 {
 107 -               compatible = "qcom,kpss-timer", "qcom,msm-timer";
 108 -               interrupts = <1 1 0x301>,
 109 -                            <1 2 0x301>,
 110 -                            <1 3 0x301>;
 111 -               reg = <0x0200a000 0x100>;
 112 -               clock-frequency = <27000000>,
 113 -                                 <32768>;
 114 -               cpu-offset = <0x80000>;
 115 -       };
 116 +               timer@200a000 {
 117 +                       compatible = "qcom,kpss-timer", "qcom,msm-timer";
 118 +                       interrupts = <1 1 0x301>,
 119 +                                    <1 2 0x301>,
 120 +                                    <1 3 0x301>;
 121 +                       reg = <0x0200a000 0x100>;
 122 +                       clock-frequency = <27000000>,
 123 +                                         <32768>;
 124 +                       cpu-offset = <0x80000>;
 125 +               };
 126
 127 -       msmgpio: gpio@800000 {
 128 -               compatible = "qcom,msm-gpio";
 129 -               gpio-controller;
 130 -               #gpio-cells = <2>;
 131 -               ngpio = <150>;
 132 -               interrupts = <0 16 0x4>;
 133 -               interrupt-controller;
 134 -               #interrupt-cells = <2>;
 135 -               reg = <0x800000 0x4000>;
 136 -       };
 137 +               msmgpio: gpio@800000 {
 138 +                       compatible = "qcom,msm-gpio";
 139 +                       gpio-controller;
 140 +                       #gpio-cells = <2>;
 141 +                       ngpio = <150>;
 142 +                       interrupts = <0 16 0x4>;
 143 +                       interrupt-controller;
 144 +                       #interrupt-cells = <2>;
 145 +                       reg = <0x800000 0x4000>;
 146 +               };
 147
 148 -       gcc: clock-controller@900000 {
 149 -               compatible = "qcom,gcc-msm8960";
 150 -               #clock-cells = <1>;
 151 -               #reset-cells = <1>;
 152 -               reg = <0x900000 0x4000>;
 153 -       };
 154 +               gcc: clock-controller@900000 {
 155 +                       compatible = "qcom,gcc-msm8960";
 156 +                       #clock-cells = <1>;
 157 +                       #reset-cells = <1>;
 158 +                       reg = <0x900000 0x4000>;
 159 +               };
 160
 161 -       clock-controller@4000000 {
 162 -               compatible = "qcom,mmcc-msm8960";
 163 -               reg = <0x4000000 0x1000>;
 164 -               #clock-cells = <1>;
 165 -               #reset-cells = <1>;
 166 -       };
 167 +               clock-controller@4000000 {
 168 +                       compatible = "qcom,mmcc-msm8960";
 169 +                       reg = <0x4000000 0x1000>;
 170 +                       #clock-cells = <1>;
 171 +                       #reset-cells = <1>;
 172 +               };
 173
 174 -       acc0: clock-controller@2088000 {
 175 -               compatible = "qcom,kpss-acc-v1";
 176 -               reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 177 -       };
 178 +               acc0: clock-controller@2088000 {
 179 +                       compatible = "qcom,kpss-acc-v1";
 180 +                       reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 181 +               };
 182
 183 -       acc1: clock-controller@2098000 {
 184 -               compatible = "qcom,kpss-acc-v1";
 185 -               reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 186 -       };
 187 +               acc1: clock-controller@2098000 {
 188 +                       compatible = "qcom,kpss-acc-v1";
 189 +                       reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 190 +               };
 191
 192 -       saw0: regulator@2089000 {
 193 -               compatible = "qcom,saw2";
 194 -               reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 195 -               regulator;
 196 -       };
 197 +               saw0: regulator@2089000 {
 198 +                       compatible = "qcom,saw2";
 199 +                       reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 200 +                       regulator;
 201 +               };
 202
 203 -       saw1: regulator@2099000 {
 204 -               compatible = "qcom,saw2";
 205 -               reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 206 -               regulator;
 207 -       };
 208 +               saw1: regulator@2099000 {
 209 +                       compatible = "qcom,saw2";
 210 +                       reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 211 +                       regulator;
 212 +               };
 213
 214 -       serial@16440000 {
 215 -               compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 216 -               reg = <0x16440000 0x1000>,
 217 -                     <0x16400000 0x1000>;
 218 -               interrupts = <0 154 0x0>;
 219 -               clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 220 -               clock-names = "core", "iface";
 221 -       };
 222 +               gsbi5: gsbi@16400000 {
 223 +                       compatible = "qcom,gsbi-v1.0.0";
 224 +                       reg = <0x16400000 0x100>;
 225 +                       clocks = <&gcc GSBI5_H_CLK>;
 226 +                       clock-names = "iface";
 227 +                       #address-cells = <1>;
 228 +                       #size-cells = <1>;
 229 +                       ranges;
 230 +
 231 +                       serial@16440000 {
 232 +                               compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 233 +                               reg = <0x16440000 0x1000>,
 234 +                                     <0x16400000 0x1000>;
 235 +                               interrupts = <0 154 0x0>;
 236 +                               clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 237 +                               clock-names = "core", "iface";
 238 +                               status = "disabled";
 239 +                       };
 240 +               };
 241
 242 -       qcom,ssbi@500000 {
 243 -               compatible = "qcom,ssbi";
 244 -               reg = <0x500000 0x1000>;
 245 -               qcom,controller-type = "pmic-arbiter";
 246 -       };
 247 +               qcom,ssbi@500000 {
 248 +                       compatible = "qcom,ssbi";
 249 +                       reg = <0x500000 0x1000>;
 250 +                       qcom,controller-type = "pmic-arbiter";
 251 +               };
 252
 253 -       rng@1a500000 {
 254 -               compatible = "qcom,prng";
 255 -               reg = <0x1a500000 0x200>;
 256 -               clocks = <&gcc PRNG_CLK>;
 257 -               clock-names = "core";
 258 +               rng@1a500000 {
 259 +                       compatible = "qcom,prng";
 260 +                       reg = <0x1a500000 0x200>;
 261 +                       clocks = <&gcc PRNG_CLK>;
 262 +                       clock-names = "core";
 263 +               };
 264         };
 265  };
 266 --
 267 1.7.10.4
 268