6326db1acdfbdc7f426fe73c026fe859ae1c49c4
[openwrt/svn-archive/archive.git] / target / linux / ixp4xx / patches-2.6.25 / 120-compex_support.patch
1 Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
2 ===================================================================
3 --- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
4 +++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
5 @@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
6 Engineering Pronghorn Metro Platform. For more
7 information on this platform, see <file:Documentation/arm/IXP4xx>.
8
9 +config MACH_COMPEX
10 + bool "Compex WP18 / NP18A"
11 + select PCI
12 + help
13 + Say 'Y' here if you want your kernel to support Compex'
14 + WP18 or NP18A boards. For more information on this
15 + platform, see http://openwrt.org
16 +
17 config ARCH_IXDP425
18 bool "IXDP425"
19 help
20 Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
21 ===================================================================
22 --- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
23 +++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
24 @@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
25 obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
26 obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
27 obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
28 +obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
29
30 obj-y += common.o
31
32 @@ -32,6 +33,7 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa
33 obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
34 obj-$(CONFIG_MACH_FSG) += fsg-setup.o
35 obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
36 +obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
37
38 obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
39 obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
40 Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
41 ===================================================================
42 --- /dev/null
43 +++ linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
44 @@ -0,0 +1,120 @@
45 +/*
46 + * arch/arm/mach-ixp4xx/compex-setup.c
47 + *
48 + * Ccompex WP18 / NP18A board-setup
49 + *
50 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
51 + *
52 + * based on ixdp425-setup.c:
53 + * Copyright (C) 2003-2005 MontaVista Software, Inc.
54 + *
55 + * Author: Imre Kaloz <Kaloz@openwrt.org>
56 + */
57 +
58 +#include <linux/kernel.h>
59 +#include <linux/init.h>
60 +#include <linux/device.h>
61 +#include <linux/serial.h>
62 +#include <linux/tty.h>
63 +#include <linux/serial_8250.h>
64 +#include <linux/slab.h>
65 +
66 +#include <asm/types.h>
67 +#include <asm/setup.h>
68 +#include <asm/memory.h>
69 +#include <asm/hardware.h>
70 +#include <asm/mach-types.h>
71 +#include <asm/irq.h>
72 +#include <asm/mach/arch.h>
73 +#include <asm/mach/flash.h>
74 +
75 +static struct flash_platform_data compex_flash_data = {
76 + .map_name = "cfi_probe",
77 + .width = 2,
78 +};
79 +
80 +static struct resource compex_flash_resource = {
81 + .flags = IORESOURCE_MEM,
82 +};
83 +
84 +static struct platform_device compex_flash = {
85 + .name = "IXP4XX-Flash",
86 + .id = 0,
87 + .dev = {
88 + .platform_data = &compex_flash_data,
89 + },
90 + .num_resources = 1,
91 + .resource = &compex_flash_resource,
92 +};
93 +
94 +static struct resource compex_uart_resources[] = {
95 + {
96 + .start = IXP4XX_UART1_BASE_PHYS,
97 + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
98 + .flags = IORESOURCE_MEM
99 + },
100 + {
101 + .start = IXP4XX_UART2_BASE_PHYS,
102 + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
103 + .flags = IORESOURCE_MEM
104 + }
105 +};
106 +
107 +static struct plat_serial8250_port compex_uart_data[] = {
108 + {
109 + .mapbase = IXP4XX_UART1_BASE_PHYS,
110 + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
111 + .irq = IRQ_IXP4XX_UART1,
112 + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
113 + .iotype = UPIO_MEM,
114 + .regshift = 2,
115 + .uartclk = IXP4XX_UART_XTAL,
116 + },
117 + {
118 + .mapbase = IXP4XX_UART2_BASE_PHYS,
119 + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
120 + .irq = IRQ_IXP4XX_UART2,
121 + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
122 + .iotype = UPIO_MEM,
123 + .regshift = 2,
124 + .uartclk = IXP4XX_UART_XTAL,
125 + },
126 + { },
127 +};
128 +
129 +static struct platform_device compex_uart = {
130 + .name = "serial8250",
131 + .id = PLAT8250_DEV_PLATFORM,
132 + .dev.platform_data = compex_uart_data,
133 + .num_resources = 2,
134 + .resource = compex_uart_resources,
135 +};
136 +
137 +static struct platform_device *compex_devices[] __initdata = {
138 + &compex_flash,
139 + &compex_uart
140 +};
141 +
142 +static void __init compex_init(void)
143 +{
144 + ixp4xx_sys_init();
145 +
146 + compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
147 + compex_flash_resource.end =
148 + IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
149 +
150 + platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
151 +}
152 +
153 +#ifdef CONFIG_MACH_COMPEX
154 +MACHINE_START(COMPEX, "Compex WP18 / NP18A")
155 + /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
156 + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
157 + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
158 + .map_io = ixp4xx_map_io,
159 + .init_irq = ixp4xx_init_irq,
160 + .timer = &ixp4xx_timer,
161 + .boot_params = 0x0100,
162 + .init_machine = compex_init,
163 +MACHINE_END
164 +#endif
165 Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
166 ===================================================================
167 --- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
168 +++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
169 @@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
170 int __init ixdp425_pci_init(void)
171 {
172 if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
173 - machine_is_ixdp465() || machine_is_kixrp435())
174 + machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
175 pci_common_init(&ixdp425_pci);
176 return 0;
177 }
178 Index: linux-2.6.25.4/arch/arm/tools/mach-types
179 ===================================================================
180 --- linux-2.6.25.4.orig/arch/arm/tools/mach-types
181 +++ linux-2.6.25.4/arch/arm/tools/mach-types
182 @@ -1276,7 +1276,7 @@ oiab MACH_OIAB OIAB 1269
183 smdk6400 MACH_SMDK6400 SMDK6400 1270
184 nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
185 greenphone MACH_GREENPHONE GREENPHONE 1272
186 -compex42x MACH_COMPEXWP18 COMPEXWP18 1273
187 +compex MACH_COMPEX COMPEX 1273
188 xmate MACH_XMATE XMATE 1274
189 energizer MACH_ENERGIZER ENERGIZER 1275
190 ime1 MACH_IME1 IME1 1276