kirkwood: add linux 3.10 support
[openwrt/svn-archive/archive.git] / target / linux / kirkwood / patches-3.10 / 0024-ARM-kirkwood-add-gigabit-ethernet-and-mvmdio-device-.patch
1 From 81547b563bd8340d98cdf2c020449ef2e7e8821d Mon Sep 17 00:00:00 2001
2 From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
3 Date: Tue, 2 Jul 2013 13:00:19 +0200
4 Subject: [PATCH 24/29] ARM: kirkwood: add gigabit ethernet and mvmdio device
5 tree nodes
6
7 This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
8 Kirkwood boards. Phy nodes are also added with reg property set on a
9 per-board basis.
10
11 Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
12 ---
13 arch/arm/boot/dts/kirkwood-cloudbox.dts | 16 +++++++
14 arch/arm/boot/dts/kirkwood-db.dtsi | 16 +++++++
15 arch/arm/boot/dts/kirkwood-dnskw.dtsi | 16 +++++++
16 arch/arm/boot/dts/kirkwood-dockstar.dts | 17 +++++++
17 arch/arm/boot/dts/kirkwood-dreamplug.dts | 28 ++++++++++++
18 arch/arm/boot/dts/kirkwood-goflexnet.dts | 16 +++++++
19 .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 30 +++++++++++++
20 arch/arm/boot/dts/kirkwood-ib62x0.dts | 16 +++++++
21 arch/arm/boot/dts/kirkwood-iconnect.dts | 16 +++++++
22 arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 24 ++++++++++
23 arch/arm/boot/dts/kirkwood-is2.dts | 2 +
24 arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 16 +++++++
25 arch/arm/boot/dts/kirkwood-lsxl.dtsi | 28 ++++++++++++
26 arch/arm/boot/dts/kirkwood-mplcec4.dts | 27 +++++++++++
27 .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 16 +++++++
28 arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 16 +++++++
29 arch/arm/boot/dts/kirkwood-ns2.dts | 2 +
30 arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 +
31 arch/arm/boot/dts/kirkwood-ns2max.dts | 2 +
32 arch/arm/boot/dts/kirkwood-ns2mini.dts | 2 +
33 arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 16 +++++++
34 arch/arm/boot/dts/kirkwood-topkick.dts | 16 +++++++
35 arch/arm/boot/dts/kirkwood-ts219-6281.dts | 4 +-
36 arch/arm/boot/dts/kirkwood-ts219-6282.dts | 4 +-
37 arch/arm/boot/dts/kirkwood-ts219.dtsi | 16 +++++++
38 arch/arm/boot/dts/kirkwood.dtsi | 52 ++++++++++++++++++++++
39 26 files changed, 414 insertions(+), 2 deletions(-)
40
41 diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
42 index 5f21d4e..03e1b68 100644
43 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
44 +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
45 @@ -87,3 +87,19 @@
46 gpios = <&gpio0 17 0>;
47 };
48 };
49 +
50 +&mdio {
51 + status = "okay";
52 +
53 + ethphy0: ethernet-phy@0 {
54 + device_type = "ethernet-phy";
55 + reg = <0>;
56 + };
57 +};
58 +
59 +&eth0 {
60 + status = "okay";
61 + ethernet0-port@0 {
62 + phy-handle = <&ethphy0>;
63 + };
64 +};
65 diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
66 index c87cfb8..ca8bf36 100644
67 --- a/arch/arm/boot/dts/kirkwood-db.dtsi
68 +++ b/arch/arm/boot/dts/kirkwood-db.dtsi
69 @@ -87,3 +87,19 @@
70 };
71 };
72 };
73 +
74 +&mdio {
75 + status = "okay";
76 +
77 + ethphy0: ethernet-phy@8 {
78 + device_type = "ethernet-phy";
79 + reg = <8>;
80 + };
81 +};
82 +
83 +&eth0 {
84 + status = "okay";
85 + ethernet0-port@0 {
86 + phy-handle = <&ethphy0>;
87 + };
88 +};
89 diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
90 index 6875ac0..7c8bc17 100644
91 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
92 +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
93 @@ -217,3 +217,19 @@
94 };
95 };
96 };
97 +
98 +&mdio {
99 + status = "okay";
100 +
101 + ethphy0: ethernet-phy@8 {
102 + device_type = "ethernet-phy";
103 + reg = <8>;
104 + };
105 +};
106 +
107 +&eth0 {
108 + status = "okay";
109 + ethernet0-port@0 {
110 + phy-handle = <&ethphy0>;
111 + };
112 +};
113 diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
114 index 0196cf6..b5aebbc 100644
115 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts
116 +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
117 @@ -91,3 +91,20 @@
118 };
119 };
120 };
121 +
122 +&mdio {
123 + status = "okay";
124 +
125 + ethphy0: ethernet-phy@0 {
126 + device_type = "ethernet-phy";
127 + compatible = "marvell,88e1116";
128 + reg = <0>;
129 + };
130 +};
131 +
132 +&eth0 {
133 + status = "okay";
134 + ethernet0-port@0 {
135 + phy-handle = <&ethphy0>;
136 + };
137 +};
138 diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
139 index 289e51d..e0c93d4 100644
140 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
141 +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
142 @@ -99,3 +99,31 @@
143 };
144 };
145 };
146 +
147 +&mdio {
148 + status = "okay";
149 +
150 + ethphy0: ethernet-phy@0 {
151 + device_type = "ethernet-phy";
152 + reg = <0>;
153 + };
154 +
155 + ethphy1: ethernet-phy@1 {
156 + device_type = "ethernet-phy";
157 + reg = <1>;
158 + };
159 +};
160 +
161 +&eth0 {
162 + status = "okay";
163 + ethernet0-port@0 {
164 + phy-handle = <&ethphy0>;
165 + };
166 +};
167 +
168 +&eth1 {
169 + status = "okay";
170 + ethernet1-port@0 {
171 + phy-handle = <&ethphy1>;
172 + };
173 +};
174 diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
175 index c3573be..aba5849 100644
176 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
177 +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
178 @@ -170,3 +170,19 @@
179 };
180 };
181 };
182 +
183 +&mdio {
184 + status = "okay";
185 +
186 + ethphy0: ethernet-phy@0 {
187 + device_type = "ethernet-phy";
188 + reg = <0>;
189 + };
190 +};
191 +
192 +&eth0 {
193 + status = "okay";
194 + ethernet0-port@0 {
195 + phy-handle = <&ethphy0>;
196 + };
197 +};
198 diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
199 index 44fd97d..210dfb9 100644
200 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
201 +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
202 @@ -96,3 +96,33 @@
203 };
204 };
205 };
206 +
207 +&mdio {
208 + status = "okay";
209 +
210 + ethphy0: ethernet-phy@0 {
211 + device_type = "ethernet-phy";
212 + compatible = "marvell,88e1121";
213 + reg = <0>;
214 + };
215 +
216 + ethphy1: ethernet-phy@1 {
217 + device_type = "ethernet-phy";
218 + compatible = "marvell,88e1121";
219 + reg = <1>;
220 + };
221 +};
222 +
223 +&eth0 {
224 + status = "okay";
225 + ethernet0-port@0 {
226 + phy-handle = <&ethphy0>;
227 + };
228 +};
229 +
230 +&eth1 {
231 + status = "okay";
232 + ethernet1-port@0 {
233 + phy-handle = <&ethphy1>;
234 + };
235 +};
236 diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
237 index 5335b1a..fff3e65 100644
238 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
239 +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
240 @@ -119,3 +119,19 @@
241
242
243 };
244 +
245 +&mdio {
246 + status = "okay";
247 +
248 + ethphy0: ethernet-phy@8 {
249 + device_type = "ethernet-phy";
250 + reg = <8>;
251 + };
252 +};
253 +
254 +&eth0 {
255 + status = "okay";
256 + ethernet0-port@0 {
257 + phy-handle = <&ethphy0>;
258 + };
259 +};
260 diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
261 index e591d5d..9fe8ba2 100644
262 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
263 +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
264 @@ -176,3 +176,19 @@
265 };
266 };
267 };
268 +
269 +&mdio {
270 + status = "okay";
271 +
272 + ethphy0: ethernet-phy@11 {
273 + device_type = "ethernet-phy";
274 + reg = <11>;
275 + };
276 +};
277 +
278 +&eth0 {
279 + status = "okay";
280 + ethernet0-port@0 {
281 + phy-handle = <&ethphy0>;
282 + };
283 +};
284 diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
285 index 3694e94..315f095 100644
286 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
287 +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
288 @@ -191,3 +191,27 @@
289 };
290 };
291 };
292 +
293 +&mdio {
294 + status = "okay";
295 +
296 + ethphy1: ethernet-phy@11 {
297 + device_type = "ethernet-phy";
298 + reg = <11>;
299 + };
300 +};
301 +
302 +&eth0 {
303 + status = "okay";
304 + ethernet0-port@0 {
305 + speed = <1000>;
306 + duplex = <1>;
307 + };
308 +};
309 +
310 +&eth1 {
311 + status = "okay";
312 + ethernet1-port@0 {
313 + phy-handle = <&ethphy1>;
314 + };
315 +};
316 diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
317 index 0bdce0a..2e5fe72 100644
318 --- a/arch/arm/boot/dts/kirkwood-is2.dts
319 +++ b/arch/arm/boot/dts/kirkwood-is2.dts
320 @@ -28,3 +28,5 @@
321 };
322 };
323 };
324 +
325 +&ethphy0 { reg = <8>; };
326 diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
327 index 5bbd054..f9194b1 100644
328 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
329 +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
330 @@ -43,3 +43,19 @@
331 };
332 };
333 };
334 +
335 +&mdio {
336 + status = "okay";
337 +
338 + ethphy0: ethernet-phy@0 {
339 + device_type = "ethernet-phy";
340 + reg = <0>;
341 + };
342 +};
343 +
344 +&eth0 {
345 + status = "okay";
346 + ethernet0-port@0 {
347 + phy-handle = <&ethphy0>;
348 + };
349 +};
350 diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
351 index 37d45c4..dcc6470 100644
352 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
353 +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
354 @@ -201,3 +201,31 @@
355 };
356 };
357 };
358 +
359 +&mdio {
360 + status = "okay";
361 +
362 + ethphy0: ethernet-phy@0 {
363 + device_type = "ethernet-phy";
364 + reg = <0>;
365 + };
366 +
367 + ethphy1: ethernet-phy@8 {
368 + device_type = "ethernet-phy";
369 + reg = <8>;
370 + };
371 +};
372 +
373 +&eth0 {
374 + status = "okay";
375 + ethernet0-port@0 {
376 + phy-handle = <&ethphy0>;
377 + };
378 +};
379 +
380 +&eth1 {
381 + status = "okay";
382 + ethernet1-port@0 {
383 + phy-handle = <&ethphy1>;
384 + };
385 +};
386 diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
387 index 90501cf..32a0133 100644
388 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
389 +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
390 @@ -190,3 +190,30 @@
391 };
392 };
393
394 +&mdio {
395 + status = "okay";
396 +
397 + ethphy0: ethernet-phy@1 {
398 + device_type = "ethernet-phy";
399 + reg = <1>;
400 + };
401 +
402 + ethphy1: ethernet-phy@2 {
403 + device_type = "ethernet-phy";
404 + reg = <2>;
405 + };
406 +};
407 +
408 +&eth0 {
409 + status = "okay";
410 + ethernet0-port@0 {
411 + phy-handle = <&ethphy0>;
412 + };
413 +};
414 +
415 +&eth1 {
416 + status = "okay";
417 + ethernet1-port@0 {
418 + phy-handle = <&ethphy1>;
419 + };
420 +};
421 diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
422 index 1ca66ab..b66b2cd 100644
423 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
424 +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
425 @@ -178,3 +178,19 @@
426 };
427 };
428 };
429 +
430 +&mdio {
431 + status = "okay";
432 +
433 + ethphy0: ethernet-phy@0 {
434 + device_type = "ethernet-phy";
435 + reg = <0>;
436 + };
437 +};
438 +
439 +&eth0 {
440 + status = "okay";
441 + ethernet0-port@0 {
442 + phy-handle = <&ethphy0>;
443 + };
444 +};
445 diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
446 index 6affd92..6a48bfd 100644
447 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
448 +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
449 @@ -82,3 +82,19 @@
450 };
451
452 };
453 +
454 +&mdio {
455 + status = "okay";
456 +
457 + ethphy0: ethernet-phy {
458 + device_type = "ethernet-phy";
459 + /* overwrite reg property in board file */
460 + };
461 +};
462 +
463 +&eth0 {
464 + status = "okay";
465 + ethernet0-port@0 {
466 + phy-handle = <&ethphy0>;
467 + };
468 +};
469 diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
470 index f2d36ecf..8ffd552 100644
471 --- a/arch/arm/boot/dts/kirkwood-ns2.dts
472 +++ b/arch/arm/boot/dts/kirkwood-ns2.dts
473 @@ -28,3 +28,5 @@
474 };
475 };
476 };
477 +
478 +&ethphy0 { reg = <8>; };
479 diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
480 index b02eb4e..16332f8 100644
481 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
482 +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
483 @@ -28,3 +28,5 @@
484 };
485 };
486 };
487 +
488 +&ethphy0 { reg = <0>; };
489 diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
490 index bcec4d6..68d767d 100644
491 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts
492 +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
493 @@ -47,3 +47,5 @@
494 };
495 };
496 };
497 +
498 +&ethphy0 { reg = <8>; };
499 diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
500 index adab1ab..5b1b17b 100644
501 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
502 +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
503 @@ -48,3 +48,5 @@
504 };
505 };
506 };
507 +
508 +&ethphy0 { reg = <0>; };
509 diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
510 index d27f724..f8be3e3 100644
511 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
512 +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
513 @@ -210,3 +210,19 @@
514 };
515 };
516 };
517 +
518 +&mdio {
519 + status = "okay";
520 +
521 + ethphy0: ethernet-phy@0 {
522 + device_type = "ethernet-phy";
523 + reg = <0>;
524 + };
525 +};
526 +
527 +&eth0 {
528 + status = "okay";
529 + ethernet0-port@0 {
530 + phy-handle = <&ethphy0>;
531 + };
532 +};
533 diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
534 index 66eb45b..34eacf2 100644
535 --- a/arch/arm/boot/dts/kirkwood-topkick.dts
536 +++ b/arch/arm/boot/dts/kirkwood-topkick.dts
537 @@ -201,3 +201,19 @@
538 };
539 };
540 };
541 +
542 +&mdio {
543 + status = "okay";
544 +
545 + ethphy0: ethernet-phy@0 {
546 + device_type = "ethernet-phy";
547 + reg = <0>;
548 + };
549 +};
550 +
551 +&eth0 {
552 + status = "okay";
553 + ethernet0-port@0 {
554 + phy-handle = <&ethphy0>;
555 + };
556 +};
557 diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
558 index 42648ab..fff3a3e 100644
559 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
560 +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
561 @@ -50,4 +50,6 @@
562 gpios = <&gpio0 16 1>;
563 };
564 };
565 -};
566 \ No newline at end of file
567 +};
568 +
569 +&ethphy0 { reg = <8>; };
570 diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
571 index 95ceeb9..ed0441a 100644
572 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
573 +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
574 @@ -50,4 +50,6 @@
575 gpios = <&gpio1 5 1>;
576 };
577 };
578 -};
579 \ No newline at end of file
580 +};
581 +
582 +&ethphy0 { reg = <0>; };
583 diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
584 index 7c022fd..6b063eb 100644
585 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
586 +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
587 @@ -81,3 +81,19 @@
588 };
589 };
590 };
591 +
592 +&mdio {
593 + status = "okay";
594 +
595 + ethphy0: ethernet-phy {
596 + device_type = "ethernet-phy";
597 + /* overwrite reg property in board file */
598 + };
599 +};
600 +
601 +&eth0 {
602 + status = "okay";
603 + ethernet0-port@0 {
604 + phy-handle = <&ethphy0>;
605 + };
606 +};
607 diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
608 index 7eef88f..ebc6dc4 100644
609 --- a/arch/arm/boot/dts/kirkwood.dtsi
610 +++ b/arch/arm/boot/dts/kirkwood.dtsi
611 @@ -203,5 +203,57 @@
612 clocks = <&gate_clk 4>;
613 status = "disabled";
614 };
615 +
616 + mdio: mdio-bus@72004 {
617 + compatible = "marvell,orion-mdio";
618 + #address-cells = <1>;
619 + #size-cells = <0>;
620 + reg = <0x72004 0x84>;
621 + interrupts = <46>;
622 + clocks = <&gate_clk 0>;
623 + status = "disabled";
624 +
625 + /* add phy nodes in board file */
626 + };
627 +
628 + eth0: ethernet-controller@72000 {
629 + compatible = "marvell,kirkwood-eth";
630 + #address-cells = <1>;
631 + #size-cells = <0>;
632 + reg = <0x72000 0x4000>;
633 + clocks = <&gate_clk 0>;
634 + marvell,tx-checksum-limit = <1600>;
635 + status = "disabled";
636 +
637 + ethernet0-port@0 {
638 + device_type = "network";
639 + compatible = "marvell,kirkwood-eth-port";
640 + reg = <0>;
641 + interrupts = <11>;
642 + /* overwrite MAC address in bootloader */
643 + local-mac-address = [00 00 00 00 00 00];
644 + /* set phy-handle property in board file */
645 + };
646 + };
647 +
648 + eth1: ethernet-controller@76000 {
649 + compatible = "marvell,kirkwood-eth";
650 + #address-cells = <1>;
651 + #size-cells = <0>;
652 + reg = <0x76000 0x4000>;
653 + clocks = <&gate_clk 19>;
654 + marvell,tx-checksum-limit = <1600>;
655 + status = "disabled";
656 +
657 + ethernet1-port@0 {
658 + device_type = "network";
659 + compatible = "marvell,kirkwood-eth-port";
660 + reg = <0>;
661 + interrupts = <15>;
662 + /* overwrite MAC address in bootloader */
663 + local-mac-address = [00 00 00 00 00 00];
664 + /* set phy-handle property in board file */
665 + };
666 + };
667 };
668 };
669 --
670 1.8.4.rc1
671