target/linux/lantiq/dts/TDW8970.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "TDW8970 - TP-LINK TD-W8970";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 gpio: pinmux@E100B10 {
  18                         pinctrl-names = "default";
  19                         pinctrl-0 = <&state_default>;
  20
  21                         state_default: pinmux {
  22                                 mdio {
  23                                         lantiq,groups = "mdio";
  24                                         lantiq,function = "mdio";
  25                                 };
  26                                 gphy-leds {
  27                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  28                                         lantiq,function = "gphy";
  29                                         lantiq,pull = <2>;
  30                                         lantiq,open-drain = <0>;
  31                                         lantiq,output = <1>;
  32                                 };
  33                                 phy-rst {
  34                                         lantiq,pins = "io42";
  35                                         lantiq,pull = <0>;
  36                                         lantiq,open-drain = <0>;
  37                                         lantiq,output = <1>;
  38                                 };
  39                                 spi-in {
  40                                         lantiq,pins = "io16";
  41                                         lantiq,open-drain = <1>;
  42                                         lantiq,pull = <2>;
  43                                 };
  44                                 spi-out {
  45                                         lantiq,pins = "io10", "io17", "io18", "io21";
  46                                         lantiq,open-drain = <0>;
  47                                         lantiq,pull = <2>;
  48                                 };
  49                                 pcie-rst {
  50                                         lantiq,pins = "io38";
  51                                         lantiq,pull = <0>;
  52                                         lantiq,output = <1>;
  53                                 };
  54                         };
  55                 };
  56
  57                 eth@E108000 {
  58                         #address-cells = <1>;
  59                         #size-cells = <0>;
  60                         compatible = "lantiq,xrx200-net";
  61                         reg = < 0xE108000 0x3000 /* switch */
  62                                 0xE10B100 0x70 /* mdio */
  63                                 0xE10B1D8 0x30 /* mii */
  64                                 0xE10B308 0x30 /* pmac */
  65                         >;
  66                         interrupt-parent = <&icu0>;
  67                         interrupts = <73 72>;
  68
  69                         lan: interface@0 {
  70                                 compatible = "lantiq,xrx200-pdi";
  71                                 #address-cells = <1>;
  72                                 #size-cells = <0>;
  73                                 reg = <0>;
  74                                 mac-address = [ 00 11 22 33 44 55 ];
  75
  76                                 ethernet@0 {
  77                                         compatible = "lantiq,xrx200-pdi-port";
  78                                         reg = <0>;
  79                                         phy-mode = "rgmii";
  80                                         phy-handle = <&phy0>;
  81                                         // gpios = <&gpio 42 1>;
  82                                 };
  83                                 ethernet@5 {
  84                                         compatible = "lantiq,xrx200-pdi-port";
  85                                         reg = <5>;
  86                                         phy-mode = "rgmii";
  87                                         phy-handle = <&phy5>;
  88                                 };
  89                                 ethernet@2 {
  90                                         compatible = "lantiq,xrx200-pdi-port";
  91                                         reg = <2>;
  92                                         phy-mode = "gmii";
  93                                         phy-handle = <&phy11>;
  94                                 };
  95                                 ethernet@3 {
  96                                         compatible = "lantiq,xrx200-pdi-port";
  97                                         reg = <4>;
  98                                         phy-mode = "gmii";
  99                                         phy-handle = <&phy13>;
 100                                 };
 101                         };
 102
 103                         mdio@0 {
 104                                 #address-cells = <1>;
 105                                 #size-cells = <0>;
 106                                 compatible = "lantiq,xrx200-mdio";
 107                                 phy0: ethernet-phy@0 {
 108                                         reg = <0x0>;
 109                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 110                                 };
 111                                 phy5: ethernet-phy@5 {
 112                                         reg = <0x5>;
 113                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 114                                 };
 115                                 phy11: ethernet-phy@11 {
 116                                         reg = <0x11>;
 117                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 118                                 };
 119                                 phy13: ethernet-phy@13 {
 120                                         reg = <0x13>;
 121                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 122                                 };
 123                         };
 124                 };
 125
 126                 ifxhcd@E101000 {
 127                         status = "okay";
 128                         gpios = <&gpio 33 0>;
 129                         lantiq,portmask = <0x3>;
 130                 };
 131         };
 132
 133         gphy-xrx200 {
 134                 compatible = "lantiq,phy-xrx200";
 135                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 136                 phys = [ 00 01 ];
 137         };
 138
 139         pcie {
 140                 compatible = "lantiq,pcie-xway";
 141         };
 142
 143         spi {
 144                 #address-cells = <1>;
 145                 #size-cells = <1>;
 146
 147                 compatible = "spi-gpio";
 148
 149                 gpio-miso = <&gpio 16 0>;
 150                 gpio-mosi = <&gpio 17 0>;
 151                 gpio-sck = <&gpio 18 0>;
 152                 num-chipselects = <1>;
 153                 cs-gpios = <&gpio 10 1>;
 154
 155                 m25p80@0 {
 156                         #address-cells = <1>;
 157                         #size-cells = <1>;
 158                         compatible = "en25q64", "m25p80";
 159                         reg = <0 0>;
 160                         linux,modalias = "en25q64";
 161                         spi-max-frequency = <1000000>;
 162
 163                         partition@0 {
 164                                 reg = <0x0 0x20000>;
 165                                 label = "u-boot";
 166                                 read-only;
 167                         };
 168
 169                         partition@20000 {
 170                                 reg = <0x20000 0x7a0000>;
 171                                 label = "linux";
 172                         };
 173
 174                         partition@7c0000 {
 175                                 reg = <0x7c0000 0x10000>;
 176                                 label = "config";
 177                                 read-only;
 178                         };
 179
 180                         ath9k_cal: partition@7d0000 {
 181                                 reg = <0x7d0000 0x30000>;
 182                                 label = "boardconfig";
 183                                 read-only;
 184                         };
 185                 };
 186         };
 187
 188         ath9k_eep {
 189                 compatible = "ath9k,eeprom";
 190                 ath,eep-flash = <&ath9k_cal 0x21000>;
 191                 ath,pci-slot = <0>;
 192         };
 193
 194         gpio-keys-polled {
 195                 compatible = "gpio-keys-polled";
 196                 #address-cells = <1>;
 197                 #size-cells = <0>;
 198                 poll-interval = <100>;
 199                 power {
 200                         label = "reset";
 201                         gpios = <&gpio 0 1>;
 202                         linux,code = <0x100>;
 203                 };
 204
 205                 wifi {
 206                         label = "wifi";
 207                         gpios = <&gpio 9 0>;
 208                         linux,code = <0x101>;
 209                         linux,input-type = <5>; /* EV_SW */
 210                 };
 211
 212                 wps {
 213                         label = "wps";
 214                         gpios = <&gpio 39 1>;
 215                         linux,code = <0x102>;
 216                 };
 217         };
 218
 219         gpio-leds {
 220                 compatible = "gpio-leds";
 221
 222                 adsl {
 223                         label = "adsl";
 224                         gpios = <&gpio 4 0>;
 225                 };
 226                 internet {
 227                         label = "internet";
 228                         gpios = <&gpio 5 0>;
 229                 };
 230                 usb0 {
 231                         label = "usb";
 232                         gpios = <&gpio 19 0>;
 233                 };
 234                 usb2 {
 235                         label = "usb2";
 236                         gpios = <&gpio 20 0>;
 237                 };
 238                 wps {
 239                         label = "wps";
 240                         gpios = <&gpio 37 0>;
 241                 };
 242         };
 243 };