target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         all0256n)
  20                 ucidef_set_interface_lan "eth0.1"
  21                 ;;
  22
  23         argus-atp52b | \
  24         b2c | \
  25         nw718 | \
  26         sl-r7205 | \
  27         w502u | \
  28         wr6202)
  29                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  30                 ;;
  31
  32         f5d8235-v1 | \
  33         f5d8235-v2 | \
  34         v11st-fe)
  35                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  36                 ucidef_add_switch "switch0" "1" "1"
  37                 ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
  38                 ucidef_add_switch_vlan "switch0" "2" "0 5t"
  39                 ;;
  40
  41         rt-n15 | \
  42         wl-351)
  43                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  44                 ucidef_add_switch "switch0" "1" "1"
  45                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
  46                 ucidef_add_switch_vlan "switch0" "2" "4 5t"
  47                 ;;
  48
  49         rt-n56u)
  50                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  51                 ucidef_add_switch "switch0" "1" "1"
  52                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
  53                 ucidef_add_switch_vlan "switch0" "2" "4 8t"
  54                 ;;
  55
  56         wcr-150gn)
  57                 ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
  58                 ;;
  59
  60         wli-tx4-ag300n)
  61                 ucidef_set_interface_lan "eth0"
  62                 ;;
  63
  64         *)
  65                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  66                 if [ -n "${RT3X5X}" ]; then
  67                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  68                 else
  69                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  70                 fi
  71                 ;;
  72         esac
  73 }
  74
  75 ramips_setup_macs()
  76 {
  77         local board="$1"
  78         local lan_mac=""
  79         local wan_mac=""
  80
  81         case $board in
  82         all0256n)
  83                 lan_mac=$(ramips_get_mac_binary factory 40)
  84                 ;;
  85
  86         argus-atp52b | \
  87         b2c | \
  88         f5d8235-v1 | \
  89         nw718 | \
  90         rt-n15 | \
  91         sl-r7205 | \
  92         wl-351)
  93                 lan_mac=$(ramips_get_mac_binary factory 4)
  94                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  95                 ;;
  96
  97         dir-300-b1 |\
  98         dir-300-b2 |\
  99         dir-600-b1)
 100                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 101                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 102                 ;;
 103
 104         esr-9753 | \
 105         nbg-419n | \
 106         wcr-150gn)
 107                 lan_mac=$(ramips_get_mac_binary factory 4)
 108                 wan_mac=$(ramips_get_mac_binary factory 40)
 109                 ;;
 110
 111         f5d8235-v2)
 112                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
 113                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 114                 ;;
 115
 116         rt-n56u)
 117                 lan_mac=$(ramips_get_mac_binary factory 4)
 118                 wan_mac=$(ramips_get_mac_binary factory 32772)
 119                 ;;
 120
 121         w502u)
 122                 lan_mac=$(ramips_get_mac_binary factory 40)
 123                 wan_mac=$(ramips_get_mac_binary factory 46)
 124                 ;;
 125
 126         wl341v3)
 127                 lan_mac=$(ramips_get_mac_binary board-nvram 65440)
 128                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 129                 ;;
 130
 131         wli-tx4-ag300n)
 132                 lan_mac=$(ramips_get_mac_binary factory 4)
 133                 ;;
 134
 135         esac
 136
 137         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 138         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 139 }
 140
 141 [ -e /etc/config/network ] && exit 0
 142
 143 touch /etc/config/network
 144
 145 board=$(ramips_board_name)
 146
 147 ramips_setup_interfaces $board
 148 ramips_setup_macs $board
 149
 150 uci commit network
 151
 152 exit 0