target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         all0256n)
  20                 ucidef_set_interface_lan "eth0.1"
  21                 ;;
  22
  23         argus-atp52b | \
  24         b2c | \
  25         nw718 | \
  26         w502u | \
  27         wr6202)
  28                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  29                 ;;
  30
  31         f5d8235-v1 | \
  32         rt-n15)
  33                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  34                 ucidef_add_switch "rtl8366s" "1" "1"
  35                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  36                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  37                 ;;
  38
  39         f5d8235-v2)
  40                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  41                 ucidef_add_switch "rtl8366rb" "1" "1"
  42                 ucidef_add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
  43                 ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
  44                 ;;
  45
  46         rt-n56u)
  47                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  48                 ucidef_add_switch "switch0" "1" "1"
  49                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
  50                 ucidef_add_switch_vlan "switch0" "2" "4 8t"
  51                 ;;
  52
  53         wcr-150gn)
  54                 ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
  55                 ;;
  56
  57         wl-351)
  58                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  59                 ucidef_add_switch "rtl8366rb" "1" "1"
  60                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  61                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  62                 ;;
  63
  64         wli-tx4-ag300n)
  65                 ucidef_set_interface_lan "eth0"
  66                 ;;
  67
  68         *)
  69                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  70                 if [ -n "${RT3X5X}" ]; then
  71                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  72                 else
  73                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  74                 fi
  75                 ;;
  76         esac
  77 }
  78
  79 ramips_setup_macs()
  80 {
  81         local board="$1"
  82         local lan_mac=""
  83         local wan_mac=""
  84
  85         case $board in
  86         all0256n)
  87                 lan_mac=$(ramips_get_mac_binary factory 40)
  88                 ;;
  89
  90         argus-atp52b | \
  91         b2c | \
  92         f5d8235-v1 | \
  93         nw718 | \
  94         rt-n15 | \
  95         wl-351)
  96                 lan_mac=$(ramips_get_mac_binary factory 4)
  97                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  98                 ;;
  99
 100         dir-300-b1 |\
 101         dir-300-b2 |\
 102         dir-600-b1)
 103                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 104                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 105                 ;;
 106
 107         esr-9753 | \
 108         nbg-419n | \
 109         wcr-150gn)
 110                 lan_mac=$(ramips_get_mac_binary factory 4)
 111                 wan_mac=$(ramips_get_mac_binary factory 40)
 112                 ;;
 113
 114         f5d8235-v2)
 115                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
 116                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 117                 ;;
 118
 119         rt-n56u)
 120                 lan_mac=$(ramips_get_mac_binary factory 4)
 121                 wan_mac=$(ramips_get_mac_binary factory 32772)
 122                 ;;
 123
 124         w502u)
 125                 lan_mac=$(ramips_get_mac_binary factory 40)
 126                 wan_mac=$(ramips_get_mac_binary factory 46)
 127                 ;;
 128
 129         wl341v3)
 130                 lan_mac=$(ramips_get_mac_binary board-nvram 65440)
 131                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 132                 ;;
 133
 134         wli-tx4-ag300n)
 135                 lan_mac=$(ramips_get_mac_binary factory 4)
 136                 ;;
 137
 138         esac
 139
 140         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 141         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 142 }
 143
 144 [ -e /etc/config/network ] && exit 0
 145
 146 touch /etc/config/network
 147
 148 board=$(ramips_board_name)
 149
 150 ramips_setup_interfaces $board
 151 ramips_setup_macs $board
 152
 153 uci commit network
 154
 155 exit 0