target/linux/ramips/dts/ARGUS_ATP52B.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ARGUS_ATP52B", "ralink,rt3052-soc";
   7         model = "Argus ATP-52B";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "bootloader";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "config";
  34                         reg = <0x30000 0x10000>;
  35                 };
  36
  37                 factory: partition@40000 {
  38                         label = "factory";
  39                         reg = <0x40000 0x10000>;
  40                 };
  41
  42                 partition@50000 {
  43                         label = "firmware";
  44                         reg = <0x50000 0x7a0000>;
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 run {
  52                         label = "argus-atp52b:green:run";
  53                         gpios = <&gpio0 9 1>;
  54                 };
  55
  56                 net {
  57                         label = "argus-atp52b:amber:net";
  58                         gpios = <&gpio0 13 1>;
  59                 };
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <20>;
  67
  68                 wps {
  69                         label = "wps";
  70                         gpios = <&gpio0 0 1>;
  71                         linux,code = <0x211>;
  72                 };
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&gpio0 10 1>;
  77                         linux,code = <0x198>;
  78                 };
  79         };
  80
  81         ethernet@10100000 {
  82                 mtd-mac-address = <&factory 0x4>;
  83         };
  84
  85         esw@10110000 {
  86                 ralink,portmap = <0x3e>;
  87         };
  88
  89         wmac@10180000 {
  90                 ralink,mtd-eeprom = <&factory 0>;
  91         };
  92
  93         otg@101c0000 {
  94                 status = "okay";
  95         };
  96 };