target/linux/ramips/dts/BC2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "BC2", "ralink,rt3052-soc";
   9         model = "NexAira BC2";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
  22                         ralink,gpiomux = "jtag";
  23                         ralink,uartmux = "gpio";
  24                         ralink,wdtmux = <1>;
  25                 };
  26
  27                 gpio0: gpio@600 {
  28                         status = "okay";
  29                 };
  30
  31         };
  32
  33         cfi@1f000000 {
  34                 compatible = "cfi-flash";
  35                 reg = <0x1f000000 0x800000>;
  36
  37                 bank-width = <2>;
  38                 device-width = <2>;
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45                 usb {
  46                         label = "bc2:blue:usb";
  47                         gpios = <&gpio0 20 1>;
  48                 };
  49         };
  50
  51         gpio-keys-polled {
  52                 compatible = "gpio-keys-polled";
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55                 poll-interval = <20>;
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 17 1>;
  59                         linux,code = <0x198>;
  60                 };
  61         };
  62
  63         ethernet@10100000 {
  64                 status = "okay";
  65         };
  66
  67         esw@10110000 {
  68                 status = "okay";
  69                 ralink,portmap = <0x2f>;
  70         };
  71
  72         wmac@10180000 {
  73                 status = "okay";
  74         };
  75
  76         otg@101c0000 {
  77                 status = "okay";
  78         };
  79 };