ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / BROADWAY.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "BROADWAY", "ralink,rt3052-soc";
7 model = "Hauppauge Broadway";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "bootloader";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "config";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x790000>;
48 };
49 };
50
51 esw@10110000 {
52 ralink,portmap = <0x3e>;
53 };
54
55 gpio-leds {
56 compatible = "gpio-leds";
57 diskmounted {
58 label = "red:diskmounted";
59 gpios = <&gpio0 9 1>;
60 };
61 wps_active {
62 label = "red:wps_active";
63 gpios = <&gpio0 14 1>;
64 };
65 };
66
67 gpio-keys-polled {
68 compatible = "gpio-keys-polled";
69 #address-cells = <1>;
70 #size-cells = <0>;
71 poll-interval = <20>;
72 factory {
73 label = "Factory Reset button";
74 gpios = <&gpio0 13 1>;
75 linux,code = <0x198>;
76 };
77 };
78
79 otg@101c0000 {
80 status = "okay";
81 };
82 };