ramips: use consistent naming scheme for LEDs
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / BROADWAY.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "BROADWAY", "ralink,rt3052-soc";
7 model = "Hauppauge Broadway";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21 bank-width = <2>;
22 device-width = <2>;
23 #address-cells = <1>;
24 #size-cells = <1>;
25
26 partition@0 {
27 label = "bootloader";
28 reg = <0x0 0x30000>;
29 read-only;
30 };
31
32 partition@30000 {
33 label = "config";
34 reg = <0x30000 0x10000>;
35 read-only;
36 };
37
38 factory: partition@40000 {
39 label = "factory";
40 reg = <0x40000 0x10000>;
41 read-only;
42 };
43
44 partition@50000 {
45 label = "firmware";
46 reg = <0x50000 0x790000>;
47 };
48 };
49
50 ethernet@10100000 {
51 mtd-mac-address = <&factory 0x4>;
52 };
53
54 esw@10110000 {
55 ralink,portmap = <0x3e>;
56 };
57
58 wmac@10180000 {
59 ralink,mtd-eeprom = <&factory 0>;
60 };
61
62 gpio-leds {
63 compatible = "gpio-leds";
64
65 diskmounted {
66 label = "broadway:red:diskmounted";
67 gpios = <&gpio0 9 1>;
68 };
69
70 wps_active {
71 label = "broadway:red:wps_active";
72 gpios = <&gpio0 14 1>;
73 };
74 };
75
76 gpio-keys-polled {
77 compatible = "gpio-keys-polled";
78 #address-cells = <1>;
79 #size-cells = <0>;
80 poll-interval = <20>;
81
82 factory {
83 label = "Factory Reset button";
84 gpios = <&gpio0 13 1>;
85 linux,code = <0x198>;
86 };
87 };
88
89 otg@101c0000 {
90 status = "okay";
91 };
92 };