target/linux/ramips/dts/CY-SWR1100.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3883.dtsi"
   4
   5 / {
   6         compatible = "CY-SWR1100", "ralink,rt3883-soc";
   7         model = "Samsung CY-SWR1100";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "i2c", "spi";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@10100000 {
  25                 port@0 {
  26                         mediatek,fixed-link = <1000 1 1 1>;
  27                         phy-mode = "rgmii";
  28                 };
  29         };
  30
  31         pci@10140000 {
  32                 status = "okay";
  33                 pinctrl-names = "default";
  34                 pinctrl-0 = <&pci_pins>;
  35
  36                 pci_pins: pci {
  37                         pci {
  38                                 ralink,group = "pci";
  39                                 ralink,function = "pci-fnc";
  40                         };
  41                 };
  42
  43                 host-bridge {
  44                         pci-bridge@1 {
  45                                 status = "okay";
  46
  47                                 wmac@0,0 {
  48                                         ralink,5ghz = <0>;
  49                                         compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
  50                                         reg = < 0x10000 0 0 0 0 >;
  51                                         ralink,eeprom = "rt2x00pci_1_0.eeprom";
  52                                 };
  53                         };
  54                 };
  55         };
  56
  57         wmac@10180000 {
  58                 status = "okay";
  59                 ralink,2ghz = <0>;
  60                 ralink,mtd-eeprom = <&factory 0>;
  61         };
  62
  63         ehci@101c0000 {
  64                 status = "okay";
  65         };
  66
  67         ohci@101c1000 {
  68                 status = "okay";
  69         };
  70
  71         nor-flash@1c000000 {
  72                 compatible = "cfi-flash";
  73                 reg = <0x1c000000 0x800000>;
  74                 bank-width = <2>;
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77
  78                 partition@0 {
  79                         label = "uboot";
  80                         reg = <0x0 0x30000>;
  81                         read-only;
  82                 };
  83
  84                 partition@30000 {
  85                         label = "uboot-env";
  86                         reg = <0x30000 0x4000>;
  87                         read-only;
  88                 };
  89
  90                 factory: partition@34000 {
  91                         label = "factory";
  92                         reg = <0x34000 0x4000>;
  93                         read-only;
  94                 };
  95
  96                 partition@38000 {
  97                         label = "nvram";
  98                         reg = <0x38000 0x8000>;
  99                         read-only;
 100                 };
 101
 102                 partition@40000 {
 103                         label = "devdata";
 104                         reg = <0x40000 0x10000>;
 105                 };
 106
 107                 partition@50000 {
 108                         label = "firmware";
 109                         reg = <0x50000 0x7b0000>;
 110                 };
 111         };
 112
 113         rtl8367 {
 114                 compatible = "realtek,rtl8367";
 115                 gpio-sda = <&gpio0 1 0>;
 116                 gpio-sck = <&gpio0 2 0>;
 117                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
 118         };
 119
 120         gpio-keys-polled {
 121                 compatible = "gpio-keys-polled";
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124                 poll-interval = <100>;
 125
 126                 reset {
 127                         label = "reset";
 128                         gpios = <&gpio0 6 1>;
 129                         linux,code = <0x198>;
 130                 };
 131
 132                 wps {
 133                         label = "wps";
 134                         gpios = <&gpio0 3 1>;
 135                         linux,code = <0x211>;
 136                 };
 137         };
 138
 139         gpio-leds {
 140                 compatible = "gpio-leds";
 141
 142                 wps {
 143                         label = "cy-swr1100:blue:wps";
 144                         gpios = <&gpio0 0 1>;
 145                 };
 146
 147                 usb {
 148                         label = "cy-swr1100:blue:usb";
 149                         gpios = <&gpio1 1 1>;
 150                 };
 151         };
 152 };