ralink: dts fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / DAP-1350.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "DAP-1350", "ralink,rt3052-soc";
7 model = "D-Link DAP-1350";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 pinctrl {
14 state_default: pinctrl0 {
15 gpio {
16 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
17 ralink,function = "gpio";
18 };
19 };
20 };
21
22 cfi@1f000000 {
23 compatible = "cfi-flash";
24 reg = <0x1f000000 0x800000>;
25
26 bank-width = <2>;
27 device-width = <2>;
28 #address-cells = <1>;
29 #size-cells = <1>;
30
31 partition@0 {
32 label = "u-boot";
33 reg = <0x0 0x30000>;
34 read-only;
35 };
36
37 partition@30000 {
38 label = "devdata";
39 reg = <0x30000 0x10000>;
40 read-only;
41 };
42
43 partition@40000 {
44 label = "devconf";
45 reg = <0x40000 0x30000>;
46 read-only;
47 };
48
49 partition@70000 {
50 label = "devlang";
51 reg = <0x70000 0x40000>;
52 read-only;
53 };
54
55 partition@b0000 {
56 label = "firmware";
57 reg = <0xb0000 0x750000>;
58 };
59 };
60
61 esw@10110000 {
62 ralink,portmap = <0x2f>;
63 };
64
65 gpio-leds {
66 compatible = "gpio-leds";
67 power {
68 label = "d-link:blue:power";
69 gpios = <&gpio0 8 1>;
70 };
71 power2 {
72 label = "d-link:red:power";
73 gpios = <&gpio0 9 1>;
74 };
75 wps {
76 label = "d-link:blue:wps";
77 gpios = <&gpio0 14 1>;
78 };
79 };
80
81 gpio-keys-polled {
82 compatible = "gpio-keys-polled";
83 #address-cells = <1>;
84 #size-cells = <0>;
85 poll-interval = <20>;
86 reset {
87 label = "reset";
88 gpios = <&gpio0 10 1>;
89 linux,code = <0x198>;
90 };
91 wps {
92 label = "wps";
93 gpios = <&gpio0 0 1>;
94 linux,code = <0x211>;
95 };
96 rt {
97 label = "rt";
98 gpios = <&gpio0 11 1>;
99 linux,code = <0x100>;
100 };
101 ap {
102 label = "ap";
103 gpios = <&gpio0 7 1>;
104 linux,code = <0x101>;
105 };
106 };
107
108 otg@101c0000 {
109 status = "okay";
110 };
111 };