target/linux/ramips/dts/DIR-300-B7.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "DIR-300-B7", "ralink,rt5350-soc";
   7         model = "D-Link DIR-300 B7";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12
  13                         m25p80@0 {
  14                                 #address-cells = <1>;
  15                                 #size-cells = <1>;
  16                                 compatible = "s25fl064k";
  17                                 reg = <0 0>;
  18                                 linux,modalias = "m25p80", "s25fl064k";
  19                                 spi-max-frequency = <10000000>;
  20
  21                                 partition@0 {
  22                                         label = "u-boot";
  23                                         reg = <0x0 0x30000>;
  24                                         read-only;
  25                                 };
  26
  27                                 partition@30000 {
  28                                         label = "u-boot-env";
  29                                         reg = <0x30000 0x10000>;
  30                                         read-only;
  31                                 };
  32
  33                                 factory: partition@40000 {
  34                                         label = "factory";
  35                                         reg = <0x40000 0x10000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@50000 {
  40                                         label = "firmware";
  41                                         reg = <0x50000 0x7b0000>;
  42                                 };
  43                         };
  44                 };
  45         };
  46
  47         pinctrl {
  48                 state_default: pinctrl0 {
  49                         gpio {
  50                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  51                                 ralink,function = "gpio";
  52                         };
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 mtd-mac-address = <&factory 0x4>;
  58         };
  59
  60         esw@10110000 {
  61                 ralink,portmap = <0x2f>;
  62                 ralink,led_polarity = <0x17>;
  63         };
  64
  65         gpio-leds {
  66                 compatible = "gpio-leds";
  67
  68                 status {
  69                         label = "dir-300-b7:green:status";
  70                         gpios = <&gpio0 9 1>;
  71                 };
  72
  73                 wps {
  74                         label = "dir-300-b7:blue:wps";
  75                         gpios = <&gpio0 13 1>;
  76                 };
  77         };
  78
  79         gpio-keys-polled {
  80                 compatible = "gpio-keys-polled";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83                 poll-interval = <20>;
  84
  85                 reset {
  86                         label = "reset";
  87                         gpios = <&gpio0 10 1>;
  88                         linux,code = <0x198>;
  89                 };
  90
  91                 wps {
  92                         label = "wps";
  93                         gpios = <&gpio0 0 1>;
  94                         linux,code = <0x211>;
  95                 };
  96         };
  97
  98         wmac@10180000 {
  99                 status = "okay";
 100                 ralink,led-polarity = <1>;
 101                 ralink,mtd-eeprom = <&factory 0>;
 102         };
 103 };