ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / DIR-600-B1.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "DIR-600-B1", "ralink,rt3050-soc";
7 model = "D-Link DIR-600 B1";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "devdata";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 partition@40000 {
40 label = "devconf";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x3b0000>;
48 };
49 };
50
51 esw@10110000 {
52 ralink,portmap = <0x2f>;
53 };
54
55 gpio-keys-polled {
56 compatible = "gpio-keys-polled";
57 #address-cells = <1>;
58 #size-cells = <0>;
59 poll-interval = <20>;
60 reset {
61 label = "reset";
62 gpios = <&gpio0 10 1>;
63 linux,code = <0x198>;
64 };
65 wps {
66 label = "wps";
67 gpios = <&gpio0 0 1>;
68 linux,code = <0x211>;
69 };
70 };
71
72 gpio-leds {
73 compatible = "gpio-leds";
74 status {
75 label = "d-link:amber:status";
76 gpios = <&gpio0 8 1>;
77 };
78 status2 {
79 label = "d-link:green:status";
80 gpios = <&gpio0 9 1>;
81 };
82 wan {
83 label = "d-link:amber:wan";
84 gpios = <&gpio0 14 1>;
85 };
86 wan2 {
87 label = "d-link:green:wan";
88 gpios = <&gpio0 12 1>;
89 };
90 wps {
91 label = "d-link:blue:wps";
92 gpios = <&gpio0 13 1>;
93 };
94 };
95 };