target/linux/ramips/dts/DIR-620-A1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "DIR-620-A1", "ralink,rt3050-soc";
   9         model = "D-Link DIR-620 A1";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  22                         ralink,uartmux = "gpio";
  23                         ralink,wdtmux = <1>;
  24                 };
  25
  26                 gpio0: gpio@600 {
  27                         status = "okay";
  28                 };
  29
  30         };
  31
  32         cfi@1f000000 {
  33                 compatible = "cfi-flash";
  34                 reg = <0x1f000000 0x800000>;
  35
  36                 bank-width = <2>;
  37                 device-width = <2>;
  38                 #address-cells = <1>;
  39                 #size-cells = <1>;
  40         };
  41
  42         ethernet@10100000 {
  43                 status = "okay";
  44         };
  45
  46         esw@10110000 {
  47                 status = "okay";
  48                 ralink,portmap = <0x2f>;
  49         };
  50
  51         gpio-keys-polled {
  52                 compatible = "gpio-keys-polled";
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55                 poll-interval = <20>;
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 10 1>;
  59                         linux,code = <0x198>;
  60                 };
  61                 wps {
  62                         label = "wps";
  63                         gpios = <&gpio0 0 1>;
  64                         linux,code = <0x211>;
  65                 };
  66         };
  67
  68         wmac@10180000 {
  69                 status = "okay";
  70         };
  71
  72         gpio-leds {
  73                 compatible = "gpio-leds";
  74                 status {
  75                         label = "d-link:amber:status";
  76                         gpios = <&gpio0 8 1>;
  77                 };
  78                 status2 {
  79                         label = "d-link:green:status";
  80                         gpios = <&gpio0 9 1>;
  81                 };
  82                 wan {
  83                         label = "d-link:amber:wan";
  84                         gpios = <&gpio0 14 1>;
  85                 };
  86                 wan2 {
  87                         label = "d-link:green:wan";
  88                         gpios = <&gpio0 12 1>;
  89                 };
  90                 wps {
  91                         label = "d-link:blue:wps";
  92                         gpios = <&gpio0 13 0>;
  93                 };
  94                 wps2 {
  95                         label = "d-link:amber:wps";
  96                         gpios = <&gpio0 11 0>;
  97                 };
  98         };
  99
 100         otg@101c0000 {
 101                 status = "okay";
 102         };
 103 };