ralink: set the mac addr via the dts file
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / F5D8235_V1.dts
1 /dts-v1/;
2
3 /include/ "rt2880.dtsi"
4
5 / {
6 #address-cells = <1>;
7 #size-cells = <1>;
8 compatible = "F5D8235_V1", "ralink,rt2880-soc";
9 model = "Belkin F5D8235 v1";
10
11 palmbus@300000 {
12 gpio0: gpio@600 {
13 status = "okay";
14 };
15 };
16
17 pinctrl {
18 state_default: pinctrl0 {
19 gpio {
20 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
21 ralink,function = "gpio";
22 };
23 };
24 };
25
26 cfi@1f000000 {
27 compatible = "cfi-flash";
28 reg = <0x1f000000 0x800000>;
29
30 bank-width = <2>;
31 device-width = <2>;
32 #address-cells = <1>;
33 #size-cells = <1>;
34
35 partition@0 {
36 label = "uboot";
37 reg = <0x0 0x30000>;
38 read-only;
39 };
40 partition@30000 {
41 label = "uboot-env";
42 reg = <0x30000 0x10000>;
43 read-only;
44 };
45 partition@40000 {
46 label = "calibration";
47 reg = <0x40000 0x10000>;
48 read-only;
49 };
50 partition@50000 {
51 label = "linux";
52 reg = <0x50000 0x3b0000>;
53 };
54 };
55
56 ethernet@400000 {
57 status = "okay";
58 mtd-mac-address = <&factory 0x4>;
59
60 port@0 {
61 ralink,fixed-link = <1000 1 1 1>;
62 };
63 };
64
65 wmac@480000 {
66 status = "okay";
67 };
68
69 rtl8367s {
70 compatible = "realtek,rtl8367s";
71 gpio-sda = <&gpio0 1 0>;
72 gpio-sck = <&gpio0 2 0>;
73 };
74
75 gpio-keys-polled {
76 compatible = "gpio-keys-polled";
77 #address-cells = <1>;
78 #size-cells = <0>;
79 poll-interval = <100>;
80 wps {
81 label = "wps";
82 gpios = <&gpio0 0 1>;
83 linux,code = <0x211>;
84 };
85 reset {
86 label = "reset";
87 gpios = <&gpio0 9 1>;
88 linux,code = <0x198>;
89 };
90 };
91
92 gpio-leds {
93 compatible = "gpio-leds";
94
95 storage {
96 label = "f5d8235-v1:blue:storage";
97 gpios = <&gpio0 7 1>;
98 };
99 storage2 {
100 label = "f5d8235-v1:orange:storage";
101 gpios = <&gpio0 8 1>;
102 };
103 };
104 };