ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / F5D8235_V1.dts
1 /dts-v1/;
2
3 /include/ "rt2880.dtsi"
4
5 / {
6 #address-cells = <1>;
7 #size-cells = <1>;
8 compatible = "F5D8235_V1", "ralink,rt2880-soc";
9 model = "Belkin F5D8235 v1";
10
11 palmbus@300000 {
12 gpio0: gpio@600 {
13 status = "okay";
14 };
15 };
16
17 pinctrl {
18 state_default: pinctrl0 {
19 gpio {
20 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
21 ralink,function = "gpio";
22 };
23 };
24 };
25
26 cfi@1f000000 {
27 compatible = "cfi-flash";
28 reg = <0x1f000000 0x800000>;
29
30 bank-width = <2>;
31 device-width = <2>;
32 #address-cells = <1>;
33 #size-cells = <1>;
34
35 partition@0 {
36 label = "uboot";
37 reg = <0x0 0x30000>;
38 read-only;
39 };
40 partition@30000 {
41 label = "uboot-env";
42 reg = <0x30000 0x10000>;
43 read-only;
44 };
45 partition@40000 {
46 label = "calibration";
47 reg = <0x40000 0x10000>;
48 read-only;
49 };
50 partition@50000 {
51 label = "linux";
52 reg = <0x50000 0x3b0000>;
53 };
54 };
55
56 ethernet@400000 {
57 status = "okay";
58
59 port@0 {
60 ralink,fixed-link = <1000 1 1 1>;
61 };
62 };
63
64 wmac@480000 {
65 status = "okay";
66 };
67
68 rtl8367s {
69 compatible = "realtek,rtl8367s";
70 gpio-sda = <&gpio0 1 0>;
71 gpio-sck = <&gpio0 2 0>;
72 };
73
74 gpio-keys-polled {
75 compatible = "gpio-keys-polled";
76 #address-cells = <1>;
77 #size-cells = <0>;
78 poll-interval = <100>;
79 wps {
80 label = "wps";
81 gpios = <&gpio0 0 1>;
82 linux,code = <0x211>;
83 };
84 reset {
85 label = "reset";
86 gpios = <&gpio0 9 1>;
87 linux,code = <0x198>;
88 };
89 };
90
91 gpio-leds {
92 compatible = "gpio-leds";
93
94 storage {
95 label = "f5d8235-v1:blue:storage";
96 gpios = <&gpio0 7 1>;
97 };
98 storage2 {
99 label = "f5d8235-v1:orange:storage";
100 gpios = <&gpio0 8 1>;
101 };
102 };
103 };