ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / FONERA20N.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "FONERA20N", "ralink,rt3052-soc";
7 model = "La Fonera 2.0N";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x7b0000>;
48 };
49 };
50
51 gpio-leds {
52 compatible = "gpio-leds";
53 wifi {
54 label = "fonera20n:orange:wifi";
55 gpios = <&gpio0 7 1>;
56 };
57 power {
58 label = "fonera20n:green:power";
59 gpios = <&gpio0 9 1>;
60 };
61 usb {
62 label = "fonera20n:orange:usb";
63 gpios = <&gpio0 14 1>;
64 };
65 };
66
67 gpio-keys-polled {
68 compatible = "gpio-keys-polled";
69 #address-cells = <1>;
70 #size-cells = <0>;
71 poll-interval = <20>;
72 reset {
73 label = "reset";
74 gpios = <&gpio0 12 1>;
75 linux,code = <0x198>;
76 };
77 switch {
78 label = "switch";
79 gpios = <&gpio0 13 1>;
80 linux,code = <0x101>;
81 };
82 };
83
84 esw@10110000 {
85 ralink,portmap = <0x2f>;
86
87 port@0 {
88 compatible = "swconfig,port";
89 swconfig,segment = "lan";
90 swconfig,portmap = <0 4>;
91 };
92 port@1 {
93 compatible = "swconfig,port";
94 swconfig,segment = "lan";
95 swconfig,portmap = <1 3>;
96 };
97 port@2 {
98 compatible = "swconfig,port";
99 swconfig,segment = "lan";
100 swconfig,portmap = <2 2>;
101 };
102 port@3 {
103 compatible = "swconfig,port";
104 swconfig,segment = "lan";
105 swconfig,portmap = <3 1>;
106 };
107 port@4 {
108 compatible = "swconfig,port";
109 swconfig,segment = "wan";
110 swconfig,portmap = <4 0>;
111 };
112 };
113
114 otg@101c0000 {
115 status = "okay";
116 };
117 };