ramips: Add support for GL-MT300N
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / FONERA20N.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "FONERA20N", "ralink,rt3052-soc";
7 model = "La Fonera 2.0N";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21 bank-width = <2>;
22 device-width = <2>;
23 #address-cells = <1>;
24 #size-cells = <1>;
25
26 partition@0 {
27 label = "u-boot";
28 reg = <0x0 0x30000>;
29 read-only;
30 };
31
32 partition@30000 {
33 label = "u-boot-env";
34 reg = <0x30000 0x10000>;
35 read-only;
36 };
37
38 factory: partition@40000 {
39 label = "factory";
40 reg = <0x40000 0x10000>;
41 read-only;
42 };
43
44 partition@50000 {
45 label = "firmware";
46 reg = <0x50000 0x7b0000>;
47 };
48 };
49
50 gpio-leds {
51 compatible = "gpio-leds";
52
53 wifi {
54 label = "fonera20n:orange:wifi";
55 gpios = <&gpio0 7 1>;
56 };
57
58 power {
59 label = "fonera20n:green:power";
60 gpios = <&gpio0 9 1>;
61 };
62
63 usb {
64 label = "fonera20n:orange:usb";
65 gpios = <&gpio0 14 1>;
66 };
67 };
68
69 gpio-keys-polled {
70 compatible = "gpio-keys-polled";
71 #address-cells = <1>;
72 #size-cells = <0>;
73 poll-interval = <20>;
74
75 reset {
76 label = "reset";
77 gpios = <&gpio0 12 1>;
78 linux,code = <0x198>;
79 };
80
81 switch {
82 label = "switch";
83 gpios = <&gpio0 13 1>;
84 linux,code = <0xf7>;
85 linux,input-type = <5>; /* EV_SW */
86 };
87 };
88
89 ethernet@10100000 {
90 mtd-mac-address = <&factory 0x28>;
91 };
92
93 esw@10110000 {
94 mediatek,portmap = <0x2f>;
95
96 port@0 {
97 compatible = "swconfig,port";
98 swconfig,segment = "lan";
99 swconfig,portmap = <0 4>;
100 };
101
102 port@1 {
103 compatible = "swconfig,port";
104 swconfig,segment = "lan";
105 swconfig,portmap = <1 3>;
106 };
107
108 port@2 {
109 compatible = "swconfig,port";
110 swconfig,segment = "lan";
111 swconfig,portmap = <2 2>;
112 };
113
114 port@3 {
115 compatible = "swconfig,port";
116 swconfig,segment = "lan";
117 swconfig,portmap = <3 1>;
118 };
119
120 port@4 {
121 compatible = "swconfig,port";
122 swconfig,segment = "wan";
123 swconfig,portmap = <4 0>;
124 };
125 };
126
127 wmac@10180000 {
128 ralink,mtd-eeprom = <&factory 0>;
129 };
130
131 otg@101c0000 {
132 status = "okay";
133 };
134 };