rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / GL-MT300N.dts
1 /dts-v1/;
2
3 #include "mt7620n.dtsi"
4
5 / {
6 compatible = "GL-MT300N", "ralink,mt7620n-soc";
7 model = "GL-MT300N";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 palmbus@10000000 {
14 gpio0: gpio@600 {
15 status = "okay";
16 };
17
18 gpio1: gpio@638 {
19 status = "okay";
20 };
21
22 gpio2: gpio@660 {
23 status = "okay";
24 };
25
26 gpio3: gpio@688 {
27 status = "okay";
28 };
29
30 spi@b00 {
31 status = "okay";
32
33 m25p80@0 {
34 #address-cells = <1>;
35 #size-cells = <1>;
36 compatible = "w25q128";
37 reg = <0 0>;
38 linux,modalias = "m25p80", "w25q128";
39 spi-max-frequency = <10000000>;
40
41 partition@0 {
42 label = "u-boot";
43 reg = <0x0 0x30000>;
44 };
45
46 partition@30000 {
47 label = "u-boot-env";
48 reg = <0x30000 0x10000>;
49 read-only;
50 };
51
52 factory: partition@40000 {
53 label = "factory";
54 reg = <0x40000 0x10000>;
55 read-only;
56 };
57
58 partition@50000 {
59 label = "firmware";
60 reg = <0x50000 0xf80000>;
61 };
62
63 partition@ff0000 {
64 label = "art";
65 reg = <0xff0000 0x10000>;
66 };
67 };
68 };
69 };
70
71 ehci@101c0000 {
72 status = "okay";
73 };
74
75 ohci@101c1000 {
76 status = "okay";
77 };
78
79 ethernet@10100000 {
80 mtd-mac-address = <&factory 0x4000>;
81 ralink,port-map = "wllll";
82 };
83
84 wmac@10180000 {
85 ralink,mtd-eeprom = <&factory 0>;
86 };
87
88 pcie@10140000 {
89 status = "okay";
90
91 pcie-bridge {
92 mt76@0,0 {
93 reg = <0x0000 0 0 0 0>;
94 device_type = "pci";
95 mediatek,mtd-eeprom = <&factory 0x8000>;
96 mediatek,2ghz = <0>;
97 };
98 };
99 };
100
101 pinctrl {
102 state_default: pinctrl0 {
103 gpio {
104 ralink,group = "wled","ephy","i2c";
105 ralink,function = "gpio";
106 };
107 };
108 };
109
110 gpio-leds {
111 compatible = "gpio-leds";
112
113 wan {
114 label = "gl-mt300n:wan";
115 gpios = <&gpio2 0 1>;
116 };
117
118 lan {
119 label = "gl-mt300n:lan";
120 gpios = <&gpio2 1 1>;
121 };
122
123 wlan {
124 label = "gl-mt300n:wlan";
125 gpios = <&gpio3 0 1>;
126 };
127
128 };
129
130 gpio-keys-polled {
131 compatible = "gpio-keys-polled";
132 #address-cells = <1>;
133 #size-cells = <0>;
134 poll-interval = <20>;
135 reset {
136 label = "reset";
137 gpios = <&gpio0 1 1>;
138 linux,code = <0x198>;
139 };
140
141 BTN_0 {
142 label = "BTN_0";
143 gpios = <&gpio2 2 1>;
144 linux,code = <0x100>;
145 };
146
147 BTN_1 {
148 label = "BTN_1";
149 gpios = <&gpio2 3 1>;
150 linux,code = <0x101>;
151 };
152 };
153 };