ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / GL-MT750.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 / {
6 compatible = "GL-MT750", "ralink,mt7620a-soc";
7 model = "GL-MT750";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 palmbus@10000000 {
14 gpio0: gpio@600 {
15 status = "okay";
16 };
17
18 gpio1: gpio@638 {
19 status = "okay";
20 };
21
22 gpio2: gpio@660 {
23 status = "okay";
24 };
25
26 gpio3: gpio@688 {
27 status = "okay";
28 };
29
30 spi@b00 {
31 status = "okay";
32
33 m25p80@0 {
34 #address-cells = <1>;
35 #size-cells = <1>;
36 compatible = "w25q128";
37 reg = <0 0>;
38 linux,modalias = "m25p80", "w25q128";
39 spi-max-frequency = <10000000>;
40
41 partition@0 {
42 label = "u-boot";
43 reg = <0x0 0x30000>;
44 };
45
46 partition@30000 {
47 label = "u-boot-env";
48 reg = <0x30000 0x10000>;
49 read-only;
50 };
51
52 factory: partition@40000 {
53 label = "factory";
54 reg = <0x40000 0x10000>;
55 read-only;
56 };
57
58 partition@50000 {
59 label = "firmware";
60 reg = <0x50000 0xf80000>;
61 };
62
63 partition@ff0000 {
64 label = "art";
65 reg = <0xff0000 0x10000>;
66 };
67 };
68 };
69 };
70
71 sdhci@10130000 {
72 status = "okay";
73 };
74
75 ehci@101c0000 {
76 status = "okay";
77 };
78
79 ohci@101c1000 {
80 status = "okay";
81 };
82
83 ethernet@10100000 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&ephy_pins>;
86 mtd-mac-address = <&factory 0x4000>;
87 ralink,port-map = "llllw";
88 };
89
90 wmac@10180000 {
91 ralink,mtd-eeprom = <&factory 0>;
92 };
93
94 pcie@10140000 {
95 status = "okay";
96
97 pcie-bridge {
98 mt76@0,0 {
99 reg = <0x0000 0 0 0 0>;
100 device_type = "pci";
101 mediatek,mtd-eeprom = <&factory 0x8000>;
102 mediatek,2ghz = <0>;
103 };
104 };
105 };
106
107 pinctrl {
108 state_default: pinctrl0 {
109 gpio {
110 ralink,group = "wled","ephy","uartf";
111 ralink,function = "gpio";
112 };
113 };
114 };
115
116 gpio-leds {
117 compatible = "gpio-leds";
118
119 wan {
120 label = "gl-mt750:wan";
121 gpios = <&gpio2 0 1>;
122 };
123
124 lan {
125 label = "gl-mt750:lan";
126 gpios = <&gpio2 1 1>;
127 };
128
129 wlan {
130 label = "gl-mt750:wlan";
131 gpios = <&gpio3 0 1>;
132 };
133
134 };
135
136 gpio-keys-polled {
137 compatible = "gpio-keys-polled";
138 #address-cells = <1>;
139 #size-cells = <0>;
140 poll-interval = <20>;
141 reset {
142 label = "reset";
143 gpios = <&gpio0 13 1>;
144 linux,code = <0x198>;
145 };
146
147 BTN_0 {
148 label = "BTN_0";
149 gpios = <&gpio2 2 1>;
150 linux,code = <0x100>;
151 };
152
153 BTN_1 {
154 label = "BTN_1";
155 gpios = <&gpio2 3 1>;
156 linux,code = <0x101>;
157 };
158 };
159 };