rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / HC5XXX.dtsi
1 #include "mt7620a.dtsi"
2
3 / {
4 chosen {
5 bootargs = "console=ttyS0,115200";
6 };
7
8 palmbus@10000000 {
9 sysc@0 {
10 ralink,gpiomux = "i2c", "jtag";
11 ralink,uartmux = "gpio";
12 ralink,wdtmux = <1>;
13 };
14
15 gpio0: gpio@600 {
16 status = "okay";
17 };
18
19 gpio2: gpio@660 {
20 status = "okay";
21 };
22
23 gpio3: gpio@688 {
24 status = "okay";
25 };
26
27 spi@b00 {
28 status = "okay";
29
30 m25p80@0 {
31 #address-cells = <1>;
32 #size-cells = <1>;
33 compatible = "jedec,spi-nor";
34 reg = <0 0>;
35 linux,modalias = "m25p80", "w25q128";
36 spi-max-frequency = <10000000>;
37
38 partition@0 {
39 label = "u-boot";
40 reg = <0x0 0x30000>;
41 };
42
43 partition@30000 {
44 label = "u-boot-env";
45 reg = <0x30000 0x10000>;
46 read-only;
47 };
48
49 factory: partition@40000 {
50 label = "factory";
51 reg = <0x40000 0x10000>;
52 };
53
54 partition@50000 {
55 label = "firmware";
56 reg = <0x50000 0xf80000>;
57 };
58
59 partition@fd0000 {
60 label = "hwf_config";
61 reg = <0xfd0000 0x10000>;
62 };
63
64 bdinfo: partition@fe0000 {
65 label = "bdinfo";
66 reg = <0xfe0000 0x10000>;
67 };
68
69 partition@ff0000 {
70 label = "backup";
71 reg = <0xff0000 0x10000>;
72 };
73 };
74 };
75 };
76
77 ehci@101c0000 {
78 status = "okay";
79 };
80
81 ohci@101c1000 {
82 status = "okay";
83 };
84
85 ethernet@10100000 {
86 pinctrl-names = "default";
87 pinctrl-0 = <&ephy_pins>;
88 mtd-mac-address = <&factory 0x4>;
89 mediatek,portmap = "wllll";
90 };
91
92 sdhci@10130000 {
93 status = "okay";
94 };
95
96 wmac@10180000 {
97 ralink,mtd-eeprom = <&factory 0>;
98 };
99
100 pcie@10140000 {
101 status = "okay";
102 };
103
104 pinctrl {
105 state_default: pinctrl0 {
106 gpio {
107 ralink,group = "uartf", "wled", "nd_sd";
108 ralink,function = "gpio";
109 };
110
111 pa {
112 ralink,group = "pa";
113 ralink,function = "pa";
114 };
115 };
116 };
117
118 gpio-keys-polled {
119 compatible = "gpio-keys-polled";
120 #address-cells = <1>;
121 #size-cells = <0>;
122 poll-interval = <20>;
123
124 reset {
125 label = "reset";
126 gpios = <&gpio0 12 1>;
127 linux,code = <0x198>;
128 };
129 };
130
131 gpio_export {
132 compatible = "gpio-export";
133 #size-cells = <0>;
134
135 usbpower {
136 gpio-export,name = "usbpower";
137 gpio-export,output = <1>;
138 gpios = <&gpio0 13 0>;
139 };
140 };
141 };