rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / HPM.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 / {
6 compatible = "HPM", "ralink,rt3883-soc";
7 model = "Omnima HPM";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 palmbus@10000000 {
14 spi@b00 {
15 status = "okay";
16
17 m25p80@0 {
18 compatible = "jedec,spi-nor";
19 spi-max-frequency = <25000000>;
20 reg = <0>;
21 #address-cells = <1>;
22 #size-cells = <1>;
23
24 partition@0 {
25 reg = <0x0 0x0030000>;
26 label = "u-boot";
27 read-only;
28 };
29
30 partition@30000 {
31 reg = <0x00030000 0x00010000>;
32 label = "config";
33 read-only;
34 };
35
36 factory: partition@40000 {
37 reg = <0x00040000 0x00010000>;
38 label = "factory";
39 read-only;
40 };
41
42 partition@50000 {
43 reg = <0x00050000 0x00fb0000>;
44 label = "firmware";
45 };
46 };
47 };
48 };
49
50 pinctrl {
51 state_default: pinctrl0 {
52 gpio {
53 ralink,group = "i2c", "jtag", "uartf";
54 ralink,function = "gpio";
55 };
56 };
57 };
58
59 ethernet@10100000 {
60 phy-handle = <&phy0>;
61 phy-mode = "rgmii";
62 mtd-mac-address = <&factory 0x28>;
63
64 mdio-bus {
65 status = "okay";
66
67 phy0: ethernet-phy@4 {
68 reg = <4>;
69 };
70 };
71 };
72
73 wmac@10180000 {
74 ralink,mtd-eeprom = <&factory 0>;
75 };
76
77 ehci@101c0000 {
78 status = "okay";
79 };
80
81 ohci@101c1000 {
82 status = "okay";
83 };
84
85 gpio-keys-polled {
86 compatible = "gpio-keys-polled";
87 #address-cells = <1>;
88 #size-cells = <0>;
89 poll-interval = <100>;
90
91 reset {
92 label = "reset";
93 gpios = <&gpio0 14 0>;
94 linux,code = <0x198>;
95 };
96 };
97
98 gpio-leds {
99 compatible = "gpio-leds";
100
101 power {
102 label = "hpm:orange:power";
103 gpios = <&gpio0 7 1>;
104 };
105
106 status {
107 label = "hpm:green:status";
108 gpios = <&gpio0 21 1>;
109 };
110
111 eth {
112 label = "hpm:green:eth";
113 gpios = <&gpio0 20 1>;
114 };
115
116 eth2 {
117 label = "hpm:red:eth";
118 gpios = <&gpio0 18 1>;
119 };
120
121 wifi {
122 label = "hpm:green:wifi";
123 gpios = <&gpio0 17 1>;
124 };
125
126 wifi2 {
127 label = "hpm:red:wifi";
128 gpios = <&gpio0 19 1>;
129 };
130 };
131
132 gpio_export {
133 compatible = "gpio-export";
134 #size-cells = <0>;
135 /* gpio 12 and 13 handle the OC input */
136
137 usb0 {
138 gpio-export,name = "usb0";
139 gpio-export,output = <1>;
140 gpios = <&gpio0 2 0>;
141 };
142
143 usb1 {
144 gpio-export,name = "usb1";
145 gpio-export,output = <1>;
146 gpios = <&gpio0 1 0>;
147 };
148 };
149 };