target/linux/ramips/dts/JHR-N805R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "JHR-N805R", "ralink,rt3050-soc";
   7         model = "JCG JHR-N805R";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         palmbus@10000000 {
  19                 spi@b00 {
  20                         status = "okay";
  21
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "jedec,spi-nor";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80", "mx25l3205d";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x10000>;
  39                                         read-only;
  40                                 };
  41
  42                                 factory: partition@40000 {
  43                                         label = "factory";
  44                                         reg = <0x40000 0x10000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@50000 {
  49                                         label = "firmware";
  50                                         reg = <0x50000 0x3b0000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 mtd-mac-address = <&factory 0x2e>;
  58         };
  59
  60         esw@10110000 {
  61                 mediatek,portmap = <0x3e>;
  62         };
  63
  64         wmac@10180000 {
  65                 ralink,mtd-eeprom = <&factory 0>;
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 system {
  72                         label = "jhr-n805r:blue:system";
  73                         gpios = <&gpio0 9 1>;
  74                 };
  75         };
  76
  77         gpio-keys-polled {
  78                 compatible = "gpio-keys-polled";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81                 poll-interval = <20>;
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&gpio0 10 1>;
  86                         linux,code = <0x198>;
  87                 };
  88         };
  89 };