target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "M2M", "ralink,rt5350-soc";
   7         model = "Intenso Memory 2 Move";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  11         };
  12
  13         palmbus@10000000 {
  14                 spi@b00 {
  15                         status = "okay";
  16                         m25p80@0 {
  17                                 #address-cells = <1>;
  18                                 #size-cells = <1>;
  19                                 compatible = "mx25l6405d";
  20                                 reg = <0 0>;
  21                                 linux,modalias = "m25p80", "mx25l6405d";
  22                                 spi-max-frequency = <10000000>;
  23
  24                                 partition@0 {
  25                                         label = "Bootloader";
  26                                         reg = <0x0 0x30000>;
  27                                         read-only;
  28                                 };
  29
  30                                 partition@30000 {
  31                                         label = "Config";
  32                                         reg = <0x30000 0x10000>;
  33                                         read-only;
  34                                 };
  35
  36                                 factory: partition@40000 {
  37                                         label = "Factory";
  38                                         reg = <0x40000 0x10000>;
  39                                         read-only;
  40                                 };
  41
  42                                 partition@50000 {
  43                                         label = "firmware";
  44                                         reg = <0x50000 0x7b0000>;
  45                                 };
  46                         };
  47                 };
  48         };
  49
  50         pinctrl {
  51                 state_default: pinctrl0 {
  52                         gpio {
  53                                 ralink,group = "i2c", "uartf";
  54                                 ralink,function = "gpio";
  55                         };
  56                 };
  57         };
  58
  59         gpio-leds {
  60                 compatible = "gpio-leds";
  61                 wifi {
  62                         label = "m2m:blue:wifi";
  63                         gpios = <&gpio0 7 1>;
  64                 };
  65                 wan {
  66                         label = "m2m:green:wan";
  67                         gpios = <&gpio0 12 1>;
  68                 };
  69         };
  70
  71         gpio-keys-polled {
  72                 compatible = "gpio-keys-polled";
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75                 poll-interval = <20>;
  76                 power {
  77                         label = "power";
  78                         gpios = <&gpio0 1 1>;
  79                         linux,code = <0x116>;
  80                 };
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 10 1>;
  84                         linux,code = <0x198>;
  85                 };
  86         };
  87
  88         ethernet@10100000 {
  89                 mtd-mac-address = <&factory 0x28>;
  90         };
  91
  92         esw@10110000 {
  93                 ralink,portmap = <0x2f>;
  94         };
  95
  96         ehci@101c0000 {
  97                 status = "okay";
  98         };
  99
 100         ohci@101c1000 {
 101                 status = "okay";
 102         };
 103
 104         wmac@10180000 {
 105                 ralink,mtd-eeprom = <&factory 0x0>;
 106         };
 107 };