target/linux/ramips/dts/MZK-750DHP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex MZK-750DHP";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13
  14                 gpio2: gpio@660 {
  15                         status = "okay";
  16                 };
  17
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "jedec,spi-nor";
  25                                 reg = <0 0>;
  26                                 linux,modalias = "m25p80", "mx25l6405d";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "u-boot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "u-boot-env";
  37                                         reg = <0x30000 0x10000>;
  38                                         read-only;
  39                                 };
  40
  41                                 factory: partition@40000 {
  42                                         label = "factory";
  43                                         reg = <0x40000 0x10000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@50000 {
  48                                         label = "firmware";
  49                                         reg = <0x50000 0x7b0000>;
  50                                 };
  51                         };
  52                 };
  53         };
  54
  55         pinctrl {
  56                 state_default: pinctrl0 {
  57                         gpio {
  58                                 ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
  59                                 ralink,function = "gpio";
  60                         };
  61                 };
  62         };
  63
  64         ethernet@10100000 {
  65                 pinctrl-names = "default";
  66                 pinctrl-0 = <&ephy_pins>;
  67                 mtd-mac-address = <&factory 0x4>;
  68                 mediatek,portmap = "llllw";
  69         };
  70
  71         gsw@10110000 {
  72                 mediatek,port4 = "ephy";
  73         };
  74
  75         wmac@10180000 {
  76                 ralink,mtd-eeprom = <&factory 0>;
  77         };
  78
  79         pcie@10140000 {
  80                 status = "okay";
  81
  82                 pcie-bridge {
  83                         mt76@0,0 {
  84                                 reg = <0x0000 0 0 0 0>;
  85                                 device_type = "pci";
  86                                 mediatek,mtd-eeprom = <&factory 0x8000>;
  87                                 mediatek,2ghz = <0>;
  88                         };
  89                 };
  90         };
  91
  92         gpio-leds {
  93                 compatible = "gpio-leds";
  94
  95                 wps {
  96                         label = "mzk-750dhp:green:wps";
  97                         gpios = <&gpio2 15 1>;
  98                 };
  99
 100                 power {
 101                         label = "mzk-750dhp:green:power";
 102                         gpios = <&gpio1 15 1>;
 103                 };
 104
 105                 wlan5g {
 106                         label = "mzk-750dhp:green:wlan5g";
 107                         gpios = <&gpio1 14 1>;
 108                 };
 109         };
 110
 111         gpio-keys-polled {
 112                 compatible = "gpio-keys-polled";
 113                 #address-cells = <1>;
 114                 #size-cells = <0>;
 115                 poll-interval = <20>;
 116
 117                 s1 {
 118                         label = "reset";
 119                         gpios = <&gpio0 1 1>;
 120                         linux,code = <0x198>;
 121                 };
 122
 123                 s2 {
 124                         label = "wps";
 125                         gpios = <&gpio2 19 1>;
 126                         linux,code = <0x211>;
 127                 };
 128         };
 129 };