target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   7         model = "Planex MZK-W300NH2";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@3e0000 {
  45                         label = "cimage";
  46                         reg = <0x3e0000 0x20000>;
  47                         read-only;
  48                 };
  49
  50                 partition@50000 {
  51                         label = "firmware";
  52                         reg = <0x50000 0x390000>;
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 mtd-mac-address = <&factory 0x4>;
  58         };
  59
  60         esw@10110000 {
  61                 ralink,portmap = <0x2f>;
  62         };
  63
  64         wmac@10180000 {
  65                 ralink,mtd-eeprom = <&factory 0>;
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70
  71                 power {
  72                         label = "mzk-w300nh2:green:power";
  73                         gpios = <&gpio0 9 1>;
  74                 };
  75
  76                 wlan {
  77                         label = "mzk-w300nh2:amber:wlan";
  78                         gpios = <&gpio0 14 1>;
  79                 };
  80
  81                 wps {
  82                         label = "mzk-w300nh2:amber:wps";
  83                         gpios = <&gpio0 11 1>;
  84                 };
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <20>;
  92
  93                 wps {
  94                         label = "wps";
  95                         gpios = <&gpio0 12 1>;
  96                         linux,code = <0x211>;
  97                 };
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio0 0 1>;
 102                         linux,code = <0x198>;
 103                 };
 104
 105                 rt {
 106                         label = "rt";
 107                         gpios = <&gpio0 13 1>;
 108                         linux,code = <0x100>;
 109                 };
 110         };
 111 };