ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / MZK-W300NH2.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "MZK-W300NH2", "ralink,rt3052-soc";
7 model = "Planex MZK-W300NH2";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@3e0000 {
46 label = "cimage";
47 reg = <0x3e0000 0x20000>;
48 read-only;
49 };
50
51 partition@50000 {
52 label = "firmware";
53 reg = <0x50000 0x390000>;
54 };
55 };
56
57 esw@10110000 {
58 ralink,portmap = <0x2f>;
59 };
60
61 gpio-leds {
62 compatible = "gpio-leds";
63 power {
64 label = "mzkw300nh2:green:power";
65 gpios = <&gpio0 9 1>;
66 };
67 wlan {
68 label = "mzkw300nh2:amber:wlan";
69 gpios = <&gpio0 14 1>;
70 };
71 wps {
72 label = "mzkw300nh2:amber:wps";
73 gpios = <&gpio0 11 1>;
74 };
75 };
76
77 gpio-keys-polled {
78 compatible = "gpio-keys-polled";
79 #address-cells = <1>;
80 #size-cells = <0>;
81 poll-interval = <20>;
82 wps {
83 label = "wps";
84 gpios = <&gpio0 12 1>;
85 linux,code = <0x211>;
86 };
87 reset {
88 label = "reset";
89 gpios = <&gpio0 0 1>;
90 linux,code = <0x198>;
91 };
92 rt {
93 label = "rt";
94 gpios = <&gpio0 13 1>;
95 linux,code = <0x100>;
96 };
97 };
98 };