target/linux/ramips/dts/MZK-WDPR.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-WDPR", "ralink,rt3052-soc";
   7         model = "Planex MZK-WDPR";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         pinctrl {
  14                 state_default: pinctrl0 {
  15                         gpio {
  16                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  17                                 ralink,function = "gpio";
  18                         };
  19                 };
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@7f0000 {
  50                         label = "Data3G";
  51                         reg = <0x7f0000 0x10000>;
  52                         read-only;
  53                 };
  54
  55                 partition@50000 {
  56                         label = "firmware";
  57                         reg = <0x50000 0x680000>;
  58                 };
  59         };
  60
  61         ethernet@10100000 {
  62                 mtd-mac-address = <&factory 0x28>;
  63         };
  64
  65         esw@10110000 {
  66                 mediatek,portmap = <0x2f>;
  67         };
  68
  69         wmac@10180000 {
  70                 ralink,mtd-eeprom = <&factory 0>;
  71         };
  72
  73         otg@101c0000 {
  74                 status = "okay";
  75         };
  76
  77         gpio-export {
  78                 compatible = "gpio-export";
  79
  80                 lcd_ctrl1 {
  81                         gpio-export,name = "lcd_ctrl1";
  82                         gpio-export,output = <0>;
  83                         gpios = <&gpio0 1 0>;
  84                 };
  85         };
  86 };