ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / PSR-680W.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "PSR-680W", "ralink,rt3052-soc";
7 model = "Petatel PSR-680W Wireless 3G Router";
8
9 chosen {
10 bootargs = "console=ttyS0,115200";
11 };
12
13 pinctrl {
14 state_default: pinctrl0 {
15 gpio {
16 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
17 ralink,function = "gpio";
18 };
19 };
20 };
21
22 cfi@1f000000 {
23 compatible = "cfi-flash";
24 reg = <0x1f000000 0x800000>;
25
26 bank-width = <2>;
27 device-width = <2>;
28 #address-cells = <1>;
29 #size-cells = <1>;
30
31 partition@0 {
32 label = "u-boot";
33 reg = <0x0 0x30000>;
34 read-only;
35 };
36
37 partition@30000 {
38 label = "u-boot-env";
39 reg = <0x30000 0x10000>;
40 read-only;
41 };
42
43 factory: partition@40000 {
44 label = "factory";
45 reg = <0x40000 0x10000>;
46 read-only;
47 };
48
49 partition@50000 {
50 label = "firmware";
51 reg = <0x50000 0x3b0000>;
52 };
53 };
54
55 esw@10110000 {
56 ralink,portmap = <0x3e>;
57 };
58
59 gpio-leds {
60 compatible = "gpio-leds";
61 wan {
62 label = "psr-680w:red:wan";
63 gpios = <&gpio0 19 1>;
64 };
65 };
66
67 gpio-keys-polled {
68 compatible = "gpio-keys-polled";
69 #address-cells = <1>;
70 #size-cells = <0>;
71 poll-interval = <20>;
72 reset {
73 label = "reset";
74 gpios = <&gpio0 0 1>;
75 linux,code = <0x198>;
76 };
77 };
78
79 otg@101c0000 {
80 status = "okay";
81 };
82 };