rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / RE6500.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 / {
6 compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
7 model = "Linksys RE6500";
8
9 memory@0 {
10 device_type = "memory";
11 reg = <0x0 0x4000000>;
12 };
13
14 chosen {
15 bootargs = "console=ttyS0,57600";
16 };
17
18 palmbus@1E000000 {
19 spi@b00 {
20 status = "okay";
21
22 m25p80@0 {
23 #address-cells = <1>;
24 #size-cells = <1>;
25 compatible = "jedec,spi-nor";
26 reg = <0 0>;
27 linux,modalias = "m25p80", "en25q64";
28 spi-max-frequency = <10000000>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 label = "firmware";
50 reg = <0x50000 0x7b0000>;
51 };
52 };
53 };
54 };
55
56 pinctrl {
57 state_default: pinctrl0 {
58 gpio {
59 ralink,group = "i2c", "uart2", "uart3", "rgmii2";
60 ralink,function = "gpio";
61 };
62 };
63 };
64
65 pcie@1e140000 {
66 status = "okay";
67
68 pcie0 {
69 mt76@0,0 {
70 reg = <0x0000 0 0 0 0>;
71 device_type = "pci";
72 mediatek,mtd-eeprom = <&factory 0x0000>;
73 mediatek,2ghz = <0>;
74 };
75 };
76
77 pcie1 {
78 mt76@1,0 {
79 reg = <0x0000 0 0 0 0>;
80 device_type = "pci";
81 mediatek,mtd-eeprom = <&factory 0x8000>;
82 mediatek,5ghz = <0>;
83 };
84 };
85 };
86
87 ethernet@1e100000 {
88 mtd-mac-address = <&factory 0x2e>;
89 };
90
91 gpio-leds {
92 compatible = "gpio-leds";
93
94 wifi {
95 label = "re6500:orange:wifi";
96 gpios = <&gpio0 0 0>;
97 };
98
99 power {
100 label = "re6500:white:power";
101 gpios = <&gpio0 9 0>;
102 };
103 };
104
105 gpio-keys-polled {
106 compatible = "gpio-keys-polled";
107 #address-cells = <1>;
108 #size-cells = <0>;
109 poll-interval = <20>;
110
111 wps {
112 label = "wps";
113 gpios = <&gpio0 10 1>;
114 linux,code = <0x211>;
115 };
116
117 reset {
118 label = "reset";
119 gpios = <&gpio0 11 0>;
120 linux,code = <0x198>;
121 };
122 };
123 };