target/linux/ramips/dts/RT-N56U.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3883.dtsi"
   4
   5 / {
   6         compatible = "RT-N56U", "ralink,rt3883-soc";
   7         model = "Asus RT-N56U";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "spi", "i2c", "jtag", "uartf";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@10100000 {
  25                 mtd-mac-address = <&factory 0x4>;
  26
  27                 port@0 {
  28                         ralink,fixed-link = <1000 1 1 1>;
  29                 };
  30         };
  31
  32         pci@10140000 {
  33                 status = "okay";
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&pci_pins>;
  36
  37                 pci_pins: pci {
  38                         pci {
  39                                 ralink,group = "pci";
  40                                 ralink,function = "pci-fnc";
  41                         };
  42                 };
  43
  44                 host-bridge {
  45                         pci-bridge@1 {
  46                                 status = "okay";
  47
  48                                 wmac@0,0 {
  49                                         compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
  50                                         reg = < 0x10000 0 0 0 0 >;
  51                                         ralink,eeprom = "rt2x00pci_1_0.eeprom";
  52                                 };
  53                         };
  54                 };
  55         };
  56
  57         wmac@10180000 {
  58                 status = "okay";
  59                 ralink,2ghz = <0>;
  60                 ralink,mtd-eeprom = <&factory 0>;
  61         };
  62
  63         ehci@101c0000 {
  64                 status = "okay";
  65         };
  66
  67         ohci@101c1000 {
  68                 status = "okay";
  69         };
  70
  71         nor-flash@1c000000 {
  72                 compatible = "cfi-flash";
  73                 reg = <0x1c000000 0x800000>;
  74                 bank-width = <2>;
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77
  78                 partition@0 {
  79                         reg = <0x0 0x0030000>;
  80                         label = "u-boot";
  81                         read-only;
  82                 };
  83
  84                 partition@30000 {
  85                         reg = <0x00030000 0x00010000>;
  86                         label = "u-boot-env";
  87                         read-only;
  88                 };
  89
  90                 factory: partition@40000 {
  91                         reg = <0x00040000 0x00010000>;
  92                         label = "factory";
  93                         read-only;
  94                 };
  95
  96                 partition@50000 {
  97                         reg = <0x00050000 0x007b0000>;
  98                         label = "firmware";
  99                 };
 100         };
 101
 102         rtl8367 {
 103                 compatible = "realtek,rtl8367";
 104                 gpio-sda = <&gpio0 1 0>;
 105                 gpio-sck = <&gpio0 2 0>;
 106                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
 107         };
 108
 109         gpio-keys-polled {
 110                 compatible = "gpio-keys-polled";
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113                 poll-interval = <100>;
 114
 115                 reset {
 116                         label = "reset";
 117                         gpios = <&gpio0 13 1>;
 118                         linux,code = <0x198>;
 119                 };
 120
 121                 wps {
 122                         label = "wps";
 123                         gpios = <&gpio1 2 1>;
 124                         linux,code = <0x211>;
 125                 };
 126         };
 127
 128         gpio-leds {
 129                 compatible = "gpio-leds";
 130
 131                 power {
 132                         label = "asus:blue:power";
 133                         gpios = <&gpio0 0 1>;
 134                 };
 135
 136                 lan {
 137                         label = "asus:blue:lan";
 138                         gpios = <&gpio0 19 1>;
 139                 };
 140
 141                 wan {
 142                         label = "asus:blue:wan";
 143                         gpios = <&gpio1 3 1>;
 144                 };
 145
 146                 usb {
 147                         label = "asus:blue:usb";
 148                         gpios = <&gpio1 0 1>;
 149                 };
 150         };
 151 };