ralink: add pinctrl driver
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / RTN56U.dts
1 /dts-v1/;
2
3 /include/ "rt3883.dtsi"
4
5 / {
6 compatible = "RT-N56U", "ralink,rt3883-soc";
7 model = "Asus RT-N56U";
8
9 palmbus@10000000 {
10 gpio1: gpio@638 {
11 status = "okay";
12 };
13 };
14
15 pinctrl {
16 state_default: pinctrl0 {
17 gpio {
18 ralink,group = "spi", "i2c", "jtag", "uartf";
19 ralink,function = "gpio";
20 };
21 };
22 };
23
24 ethernet@10100000 {
25 port@0 {
26 ralink,fixed-link = <1000 1 1 1>;
27 };
28 };
29
30 pci@10140000 {
31 status = "okay";
32
33 pinctrl-names = "default";
34 pinctrl-0 = <&pci_pins>;
35 pci_pins: pci {
36 pci {
37 ralink,group = "pci";
38 ralink,function = "pci-fnc";
39 };
40 };
41
42 host-bridge {
43 pci-bridge@1 {
44 status = "okay";
45 };
46 };
47 };
48
49 wmac@10180000 {
50 ralink,2ghz = <0>;
51 };
52
53 ehci@101c0000 {
54 status = "okay";
55 };
56
57 ohci@101c1000 {
58 status = "okay";
59 };
60
61 nor-flash@1c000000 {
62 compatible = "cfi-flash";
63 reg = <0x1c000000 0x800000>;
64
65 bank-width = <2>;
66 #address-cells = <1>;
67 #size-cells = <1>;
68
69 partition@0 {
70 reg = <0x0 0x0030000>;
71 label = "u-boot";
72 read-only;
73 };
74
75 partition@30000 {
76 reg = <0x00030000 0x00010000>;
77 label = "u-boot-env";
78 read-only;
79 };
80
81 partition@40000 {
82 reg = <0x00040000 0x00010000>;
83 label = "factory";
84 read-only;
85 };
86
87 partition@50000 {
88 reg = <0x00050000 0x007b0000>;
89 label = "firmware";
90 };
91 };
92
93 rtl8367 {
94 compatible = "realtek,rtl8367";
95 gpio-sda = <&gpio0 1 0>;
96 gpio-sck = <&gpio0 2 0>;
97 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
98 };
99
100 gpio-keys-polled {
101 compatible = "gpio-keys-polled";
102 #address-cells = <1>;
103 #size-cells = <0>;
104 poll-interval = <100>;
105 reset {
106 label = "reset";
107 gpios = <&gpio0 13 1>;
108 linux,code = <0x198>;
109 };
110 wps {
111 label = "wps";
112 gpios = <&gpio1 2 1>;
113 linux,code = <0x211>;
114 };
115 };
116
117 gpio-leds {
118 compatible = "gpio-leds";
119
120 power {
121 label = "asus:blue:power";
122 gpios = <&gpio0 0 1>;
123 };
124 lan {
125 label = "asus:blue:lan";
126 gpios = <&gpio0 19 1>;
127 };
128 wan {
129 label = "asus:blue:wan";
130 gpios = <&gpio1 3 1>;
131 };
132 usb {
133 label = "asus:blue:usb";
134 gpios = <&gpio1 0 1>;
135 };
136 };
137 };