target/linux/ramips/dts/SAP-G3200U3.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "STORYLiNK SAP-G3200U3";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         palmbus@1E000000 {
  19                 spi@b00 {
  20                         status = "okay";
  21
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "jedec,spi-nor";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80", "en25q64";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x1000>;
  39                                         read-only;
  40                                 };
  41
  42                                 partition@31000 {
  43                                         label = "config";
  44                                         reg = <0x31000 0xf000>;
  45                                         read-only;
  46                                 };
  47
  48                                 factory: partition@40000 {
  49                                         label = "factory";
  50                                         reg = <0x40000 0x10000>;
  51                                         read-only;
  52                                 };
  53
  54                                 partition@50000 {
  55                                         label = "firmware";
  56                                         reg = <0x50000 0x7b0000>;
  57                                 };
  58                         };
  59                 };
  60         };
  61
  62         pcie@1e140000 {
  63                 status = "okay";
  64
  65                 pcie0 {
  66                         mt76@0,0 {
  67                                 reg = <0x0000 0 0 0 0>;
  68                                 device_type = "pci";
  69                                 mediatek,mtd-eeprom = <&factory 0x8000>;
  70                                 mediatek,2ghz = <0>;
  71                         };
  72                 };
  73
  74                 pcie1 {
  75                         mt76@1,0 {
  76                                 reg = <0x0000 0 0 0 0>;
  77                                 device_type = "pci";
  78                                 mediatek,mtd-eeprom = <&factory 0x0000>;
  79                                 mediatek,5ghz = <0>;
  80                         };
  81                 };
  82         };
  83
  84         ethernet@1e100000 {
  85                 mtd-mac-address = <&factory 0xe006>;
  86         };
  87
  88         gpio-leds {
  89                 compatible = "gpio-leds";
  90
  91                 usb {
  92                         label = "sap-g3200u3:green:usb";
  93                         gpios = <&gpio0 13 1>;
  94                 };
  95         };
  96
  97         gpio-keys-polled {
  98                 compatible = "gpio-keys-polled";
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101                 poll-interval = <20>;
 102
 103                 reset {
 104                         label = "reset";
 105                         gpios = <&gpio0 16 1>;
 106                         linux,code = <0x198>;
 107                 };
 108
 109                 rfkill {
 110                         label = "rfkill";
 111                         gpios = <&gpio0 14 1>;
 112                         linux,code = <0xf7>;
 113                 };
 114         };
 115
 116         pinctrl {
 117                 state_default: pinctrl0 {
 118                         gpio {
 119                                 ralink,group = "uart3", "jtag";
 120                                 ralink,function = "gpio";
 121                         };
 122                 };
 123         };
 124 };