ramips: Add support for GL-MT300N
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / TEW-691GR.dts
1 /dts-v1/;
2
3 /include/ "rt3883.dtsi"
4
5 / {
6 compatible = "TEW-691GR", "ralink,rt3883-soc";
7 model = "TRENDnet TEW-691GR";
8
9 palmbus@10000000 {
10 gpio1: gpio@638 {
11 status = "okay";
12 };
13 };
14
15 pinctrl {
16 state_default: pinctrl0 {
17 gpio {
18 ralink,group = "spi", "i2c", "jtag", "uartf";
19 ralink,function = "gpio";
20 };
21 };
22 };
23
24 ethernet@10100000 {
25 mtd-mac-address = <&factory 0x28>;
26
27 port@0 {
28 phy-handle = <&phy0>;
29 phy-mode = "rgmii";
30 };
31
32 mdio-bus {
33 status = "okay";
34
35 phy0: ethernet-phy@0 {
36 reg = <0>;
37 };
38 };
39 };
40
41 wmac@10180000 {
42 ralink,5ghz = <0>;
43 };
44
45 nor-flash@1c000000 {
46 compatible = "cfi-flash";
47 reg = <0x1c000000 0x800000>;
48 bank-width = <2>;
49 #address-cells = <1>;
50 #size-cells = <1>;
51
52 partition@0 {
53 reg = <0x0 0x0030000>;
54 label = "u-boot";
55 read-only;
56 };
57
58 partition@30000 {
59 reg = <0x00030000 0x00010000>;
60 label = "u-boot-env";
61 read-only;
62 };
63
64 factory: partition@40000 {
65 reg = <0x00040000 0x00010000>;
66 label = "factory";
67 read-only;
68 };
69
70 partition@50000 {
71 reg = <0x00050000 0x007b0000>;
72 label = "firmware";
73 };
74 };
75
76 gpio-keys-polled {
77 compatible = "gpio-keys-polled";
78 #address-cells = <1>;
79 #size-cells = <0>;
80 poll-interval = <100>;
81
82 reset {
83 label = "reset";
84 gpios = <&gpio0 10 1>;
85 linux,code = <0x198>;
86 };
87
88 wps {
89 label = "wps";
90 gpios = <&gpio1 2 1>;
91 linux,code = <0x211>;
92 };
93
94 rfkill {
95 label = "rfkill";
96 gpios = <&gpio0 0 1>;
97 linux,code = <0xf7>;
98 };
99 };
100
101 gpio-leds {
102 compatible = "gpio-leds";
103
104 wps {
105 label = "tew-691gr:green:wps";
106 gpios = <&gpio0 9 1>;
107 };
108 };
109 };