ramips: Add support for GL-MT300N
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / W306R_V20.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "W306R_V20", "ralink,rt3052-soc";
7 model = "Tenda W306R V2.0";
8
9 cfi@1f000000 {
10 compatible = "cfi-flash";
11 reg = <0x1f000000 0x800000>;
12 bank-width = <2>;
13 device-width = <2>;
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 partition@0 {
18 label = "u-boot";
19 reg = <0x0 0x30000>;
20 read-only;
21 };
22
23 partition@30000 {
24 label = "u-boot-env";
25 reg = <0x30000 0x10000>;
26 read-only;
27 };
28
29 factory: partition@40000 {
30 label = "factory";
31 reg = <0x40000 0x10000>;
32 read-only;
33 };
34
35 partition@50000 {
36 label = "firmware";
37 reg = <0x50000 0x3b0000>;
38 };
39 };
40
41 pinctrl {
42 state_default: pinctrl0 {
43 gpio {
44 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
45 ralink,function = "gpio";
46 };
47 };
48 };
49
50 ethernet@10100000 {
51 mtd-mac-address = <&factory 0x28>;
52 };
53
54 esw@10110000 {
55 mediatek,portmap = <0x3e>;
56 };
57
58 wmac@10180000 {
59 ralink,mtd-eeprom = <&factory 0>;
60 };
61
62 gpio-leds {
63 compatible = "gpio-leds";
64
65 sys {
66 label = "w306r-v20:green:sys";
67 gpios = <&gpio0 9 1>;
68 };
69
70 wps {
71 label = "w306r-v20:green:wps";
72 gpios = <&gpio0 13 1>;
73 };
74 };
75
76 gpio-keys-polled {
77 compatible = "gpio-keys-polled";
78 #address-cells = <1>;
79 #size-cells = <0>;
80 poll-interval = <20>;
81
82 reset {
83 label = "RESET/WPS";
84 gpios = <&gpio0 10 1>;
85 linux,code = <0x198>;
86 };
87 };
88 };