target/linux/ramips/dts/WCR150GN.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WCR150GN", "ralink,rt3050-soc";
   7         model = "Sparklan WCR-150GN";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x3b0000>;
  47                 };
  48         };
  49
  50         gpio-leds {
  51                 compatible = "gpio-leds";
  52
  53                 user {
  54                         label = "wcr-150gn:amber:user";
  55                         gpios = <&gpio0 12 1>;
  56                 };
  57
  58                 power {
  59                         label = "wcr-150gn:amber:power";
  60                         gpios = <&gpio0 8 1>;
  61                 };
  62         };
  63
  64         gpio-keys-polled {
  65                 compatible = "gpio-keys-polled";
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68                 poll-interval = <20>;
  69
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio0 10 1>;
  73                         linux,code = <0x211>;
  74                 };
  75
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 0 1>;
  79                         linux,code = <0x198>;
  80                 };
  81         };
  82
  83         ethernet@10100000 {
  84                 mtd-mac-address = <&factory 0x4>;
  85         };
  86
  87         esw@10110000 {
  88                 ralink,portmap = <0x2f>;
  89         };
  90
  91         wmac@10180000 {
  92                 ralink,mtd-eeprom = <&factory 0>;
  93         };
  94
  95         otg@101c0000 {
  96                 status = "okay";
  97         };
  98 };