target/linux/ramips/dts/WCR150GN.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "WCR150GN", "ralink,rt3052-soc";
   9         model = "Sparklan WCR-150GN";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  22                         ralink,uartmux = "gpio";
  23                         ralink,wdtmux = <1>;
  24                 };
  25
  26                 gpio0: gpio@600 {
  27                         status = "okay";
  28                 };
  29         };
  30
  31         cfi@1f000000 {
  32                 compatible = "cfi-flash";
  33                 reg = <0x1f000000 0x800000>;
  34
  35                 bank-width = <2>;
  36                 device-width = <2>;
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43                 user {
  44                         label = "wcr150gn:amber:user";
  45                         gpios = <&gpio0 12 1>;
  46                 };
  47                 power {
  48                         label = "wcr150gn:amber:power";
  49                         gpios = <&gpio0 8 1>;
  50                 };
  51         };
  52
  53         gpio-keys-polled {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <20>;
  58                 wps {
  59                         label = "wps";
  60                         gpios = <&gpio0 10 1>;
  61                         linux,code = <0x211>;
  62                 };
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 0 1>;
  66                         linux,code = <0x198>;
  67                 };
  68         };
  69
  70         ethernet@10100000 {
  71                 status = "okay";
  72         };
  73
  74         esw@10110000 {
  75                 status = "okay";
  76                 ralink,portmap = <0x2f>;
  77         };
  78
  79         wmac@10180000 {
  80                 status = "okay";
  81         };
  82
  83         otg@101c0000 {
  84                 status = "okay";
  85         };
  86 };