ralink: add support for netis WF-2881
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WF-2881.dts
1 /dts-v1/;
2
3 /include/ "mt7621.dtsi"
4
5 / {
6 compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
7 model = "NETIS WF-2881";
8
9 memory@0 {
10 device_type = "memory";
11 reg = <0x0 0x8000000>;
12 };
13
14 palmbus@1E000000 {
15 spi@b00 {
16 status="disabled";
17 };
18 };
19
20 chosen {
21 bootargs = "console=ttyS0,57600";
22 };
23
24 nand@1e003000 {
25 compatible = "mtk,mt7621-nand";
26 bank-width = <2>;
27 reg = <0x1e003000 0x800
28 0x1e003800 0x800>;
29 #address-cells = <1>;
30 #size-cells = <1>;
31
32 partition@0 {
33 label = "u-boot";
34 reg = <0x0 0x30000>;
35 read-only;
36 };
37
38 partition@30000 {
39 label = "u-boot-env";
40 reg = <0x30000 0x1000>;
41 read-only;
42 };
43
44 partition@80000 {
45 label = "config";
46 reg = <0x80000 0x80000>;
47 read-only;
48 };
49
50 factory: partition@100000 {
51 label = "factory";
52 reg = <0x100000 0x40000>;
53 read-only;
54 };
55
56 firmware {
57 label = "firmware";
58 reg = <0x140000 0x6EC0000>;
59 };
60
61 partition@140000 {
62 label = "kernel";
63 reg = <0x140000 0x200000>;
64 };
65
66 partition@340000 {
67 label = "ubi";
68 reg = <0x340000 0x6CC0000>;
69 };
70 };
71
72 pcie@1e140000 {
73 status = "okay";
74
75 pcie0 {
76 mt76@0,0 {
77 reg = <0x0000 0 0 0 0>;
78 device_type = "pci";
79 mediatek,mtd-eeprom = <&factory 0x8000>;
80 mediatek,2ghz = <0>;
81 };
82 };
83
84 pcie1 {
85 mt76@1,0 {
86 reg = <0x0000 0 0 0 0>;
87 device_type = "pci";
88 mediatek,mtd-eeprom = <&factory 0x0000>;
89 mediatek,5ghz = <0>;
90 };
91 };
92 };
93
94 ethernet@1e100000 {
95 mtd-mac-address = <&factory 0xe006>;
96 };
97
98 gpio-leds {
99 compatible = "gpio-leds";
100
101 usb {
102 label = "wf-2881:green:usb";
103 gpios = <&gpio0 6 1>;
104 };
105
106 wps {
107 label = "wf-2881:green:wps";
108 gpios = <&gpio0 0 1>;
109 };
110 };
111
112 gpio-keys-polled {
113 compatible = "gpio-keys-polled";
114 #address-cells = <1>;
115 #size-cells = <0>;
116 poll-interval = <20>;
117
118 reset {
119 label = "reset";
120 gpios = <&gpio0 12 1>;
121 linux,code = <0x198>;
122 };
123 };
124
125 pinctrl {
126 state_default: pinctrl0 {
127 gpio {
128 ralink,group = "uart3", "jtag";
129 ralink,function = "gpio";
130 };
131 };
132 };
133 };