rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WHR-300HP2.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 / {
6 compatible = "ralink,mt7620a-soc";
7 model = "Buffalo WHR-300HP2";
8
9 palmbus@10000000 {
10 gpio2: gpio@660 {
11 status = "okay";
12 };
13
14 spi@b00 {
15 status = "okay";
16
17 m25p80@0 {
18 #address-cells = <1>;
19 #size-cells = <1>;
20 compatible = "jedec,spi-nor";
21 reg = <0 0>;
22 linux,modalias = "m25p80", "s25fl064k";
23 spi-max-frequency = <10000000>;
24
25 partition@0 {
26 label = "u-boot";
27 reg = <0x0 0x30000>;
28 read-only;
29 };
30
31 partition@30000 {
32 label = "u-boot-env";
33 reg = <0x30000 0x10000>;
34 read-only;
35 };
36
37 factory: partition@40000 {
38 label = "factory";
39 reg = <0x40000 0x10000>;
40 read-only;
41 };
42
43 partition@50000 {
44 label = "firmware";
45 reg = <0x50000 0x7b0000>;
46 };
47 };
48 };
49 };
50
51 pinctrl {
52 state_default: pinctrl0 {
53 gpio {
54 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
55 ralink,function = "gpio";
56 };
57
58 pa {
59 ralink,group = "pa";
60 ralink,function = "pa";
61 };
62 };
63 };
64
65 ethernet@10100000 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&ephy_pins>;
68 mediatek,portmap = "llllw";
69 };
70
71 gsw@10110000 {
72 mediatek,port4 = "ephy";
73 };
74
75 wmac@10180000 {
76 ralink,mtd-eeprom = <&factory 0>;
77 };
78
79 gpio-leds {
80 compatible = "gpio-leds";
81
82 power {
83 label = "whr-300hp2:red:power";
84 gpios = <&gpio0 7 1>;
85 };
86
87 wifi {
88 label = "whr-300hp2:green:wifi";
89 gpios = <&gpio0 8 1>;
90 };
91
92 power2 {
93 label = "whr-300hp2:green:power";
94 gpios = <&gpio0 9 1>;
95 };
96
97 wifi2 {
98 label = "whr-300hp2:orange:wifi";
99 gpios = <&gpio0 10 1>;
100 };
101
102 internet {
103 label = "whr-300hp2:green:internet";
104 gpios = <&gpio2 17 1>;
105 };
106
107 router {
108 label = "whr-300hp2:green:router";
109 gpios = <&gpio2 18 1>;
110 };
111
112 router2 {
113 label = "whr-300hp2:orange:router";
114 gpios = <&gpio2 19 1>;
115 };
116 };
117
118 gpio-keys-polled {
119 compatible = "gpio-keys-polled";
120 #address-cells = <1>;
121 #size-cells = <0>;
122 poll-interval = <20>;
123
124 reset {
125 label = "reset";
126 gpios = <&gpio2 12 1>;
127 linux,code = <0x198>;
128 };
129
130 aoss {
131 label = "aoss";
132 gpios = <&gpio2 13 1>;
133 linux,code = <0x211>;
134 };
135
136 ap {
137 label = "ap";
138 gpios = <&gpio2 14 1>;
139 linux,code = <0x100>;
140 linux,input-type = <5>; /* EV_SW */
141 };
142
143 bridge {
144 label = "bridge";
145 gpios = <&gpio2 15 1>;
146 linux,code = <0x100>;
147 linux,input-type = <5>; /* EV_SW */
148 };
149 };
150 };