00d9d03093dab20a4e7e9127112a974c7952d398
[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / WHR-600D.dts
1 /dts-v1/;
2
3 /include/ "mt7620a.dtsi"
4
5 / {
6 compatible = "ralink,mt7620a-soc";
7 model = "Buffalo WHR-600D";
8
9 palmbus@10000000 {
10 gpio2: gpio@660 {
11 status = "okay";
12 };
13
14 spi@b00 {
15 status = "okay";
16
17 m25p80@0 {
18 #address-cells = <1>;
19 #size-cells = <1>;
20 compatible = "en25q64";
21 reg = <0 0>;
22 linux,modalias = "m25p80", "mx25l6405d";
23 spi-max-frequency = <10000000>;
24
25 partition@0 {
26 label = "u-boot";
27 reg = <0x0 0x30000>;
28 read-only;
29 };
30
31 partition@30000 {
32 label = "u-boot-env";
33 reg = <0x30000 0x10000>;
34 read-only;
35 };
36
37 factory: partition@40000 {
38 label = "factory";
39 reg = <0x40000 0x10000>;
40 read-only;
41 };
42
43 partition@50000 {
44 label = "firmware";
45 reg = <0x50000 0x6b0000>;
46 };
47
48 partition@700000 {
49 label = "usercfg";
50 reg = <0x700000 0x100000>;
51 };
52 };
53 };
54 };
55
56 pinctrl {
57 state_default: pinctrl0 {
58 gpio {
59 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
60 ralink,function = "gpio";
61 };
62 };
63 };
64
65 ethernet@10100000 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&ephy_pins>;
68
69 ralink,port-map = "llllw";
70 };
71
72 gsw@10110000 {
73 ralink,port4 = "ephy";
74 };
75
76 gpio-leds {
77 compatible = "gpio-leds";
78 power {
79 label = "buffalo:red:power";
80 gpios = <&gpio0 7 1>;
81 };
82 status {
83 label = "buffalo:green:status";
84 gpios = <&gpio0 8 1>;
85 };
86 power2 {
87 label = "buffalo:green:power";
88 gpios = <&gpio0 9 1>;
89 };
90 status2 {
91 label = "buffalo:orange:status";
92 gpios = <&gpio0 10 1>;
93 };
94 internet {
95 label = "buffalo:green:internet";
96 gpios = <&gpio2 17 1>;
97 };
98 router {
99 label = "buffalo:green:router";
100 gpios = <&gpio2 18 1>;
101 };
102 router2 {
103 label = "buffalo:orange:router";
104 gpios = <&gpio2 19 1>;
105 };
106 };
107
108 gpio-keys-polled {
109 compatible = "gpio-keys-polled";
110 #address-cells = <1>;
111 #size-cells = <0>;
112 poll-interval = <20>;
113 s1 {
114 label = "reset";
115 gpios = <&gpio2 12 1>;
116 linux,code = <0x100>;
117 };
118 s2 {
119 label = "aoss";
120 gpios = <&gpio2 13 1>;
121 linux,code = <0x101>;
122 };
123 s3 {
124 label = "ap";
125 gpios = <&gpio2 14 1>;
126 linux,code = <0x102>;
127 };
128 s4 {
129 label = "bridge";
130 gpios = <&gpio2 15 1>;
131 linux,code = <0x103>;
132 };
133 };
134 };