target/linux/ramips/dts/WHR-G300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WHR-G300N", "ralink,rt3052-soc";
   7         model = "Buffalo WHR-G300N";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19         };
  20
  21         cfi@1f000000 {
  22                 compatible = "cfi-flash";
  23                 reg = <0x1f000000 0x800000>;
  24
  25                 bank-width = <2>;
  26                 device-width = <2>;
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29         };
  30
  31         ethernet@10100000 {
  32                 status = "okay";
  33         };
  34
  35         esw@10110000 {
  36                 status = "okay";
  37                 ralink,portmap = <0x2f>;
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42                 diag {
  43                         label = "whr-g300n:red:diag";
  44                         gpios = <&gpio0 7 1>;
  45                 };
  46                 router {
  47                         label = "whr-g300n:green:router";
  48                         gpios = <&gpio0 9 1>;
  49                 };
  50                 security {
  51                         label = "whr-g300n:amber:security";
  52                         gpios = <&gpio0 14 1>;
  53                 };
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <20>;
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 10 1>;
  64                         linux,code = <0x198>;
  65                 };
  66                 aoss {
  67                         label = "aoss";
  68                         gpios = <&gpio0 0 1>;
  69                         linux,code = <0x211>;
  70                 };
  71                 router-off {
  72                         label = "router-off";
  73                         gpios = <&gpio0 11 1>;
  74                         linux,code = <0x102>;
  75                 };
  76                 router-on {
  77                         label = "router-on";
  78                         gpios = <&gpio0 8 1>;
  79                         linux,code = <0x103>;
  80                 };
  81         };
  82
  83         wmac@10180000 {
  84                 status = "okay";
  85         };
  86 };